Binding the aircraft and C23 Camera
Step 1.
Switch on the ST16s followed by the H Plus aircraft.
Step 2.
Tap the [ ] in the top right corner on the main interface of
ST16s, then tap the [ ].
Step 3. Tap the refresh icon ( ) if the camera SSID is not displayed.
Step 4.
Tap on the serial number of the C23 camera from the pop up.
(If multiple cameras are used, check the MAC number on the side of each
camera to ensure correct camera is selected for binding).
C23- XXXXXX (The last 6 numbers/characters of camera MAC Address).
Step 5.
Use the password “1234567890”, authorize the camera and tap "OK" to confirm.
Note: If the connection process is delayed, close the pop-up window and
then repeat the above steps
