Gimbal calibration problem

[Mr. I]

My Typhoon H won't do a gimbal calibration. I tap the cali button but it won't finish the cali. About 6 seconds into it, it freezes. Any Ideas ?

 

[Sureshot]

Both the flight controller & the gimbal have their own separate IMU & compass.
First do the H's compass & gyro calibration.
Then do the gimbal calibration, followed by turning the H off and back on.
If the gimbal calibration still fails, then reflash the software on the H and repeat the calibrations.

 

[Mr. I]

Both the flight controller & the gimbal have their own separate IMU & compass.
First do the H's compass & gyro calibration.
Then do the gimbal calibration, followed by turning the H off and back on.
If the gimbal calibration still fails, then reflash the software on the H and repeat the calibrations.

How do I reflash ? Because now the remote is glitching out alot.

 

[Sureshot]

How do I reflash ? Because now the remote is glitching out alot.

First fix the problem with the ST16.
(maybe a noisy power switch)
(maybe too close to a Wifi router)