Howdy,
My E90 is not communicating with me, my ST16S, or the rest of the world and I can't figure it out. If this situation has been addressed elsewhere I can't find it but would appreciate any links or other help.
So yesterday I tried out the manual bind procedure as described on p61 of the Owners Guide. It took a few attempts to get the timing and order of all the steps correct, eventually I was rewarded with 6 flashing yellow lights. Tried this a few more times and the results were inconsistent - sometimes the landing gear switch worked, sometimes it didn't. Sometimes I could arm the motors while in manual bind status, sometimes I couldn't. I did not attach the props nor did I even consider attempting to fly.
Today I'm trying to upload a survey mission that I created on the ST16S. When I turn on the H520 I get all the tones and lights, but my E90 never powers up - no movement at all. I've tried different SD cards, I've tried the "secret" button, I've swapped out batteries, I've turned the H520 off and on numerous times, I've removed and reattached the E90 gimbal. No luck. Sometimes when I'm wrestling with the gimbal or buttons I end up turning the H520 upside down and I get all six flashing yellow lights indicating manual bind status. (Twice when turning it upside down the landing gear have raised and then I tried all kinds of gyrations to get them back down - eventually they do, but I don't recall just what combination of dance moves led to success. Just now when I was trying to get the landing gear back down I got 6 flashing PURPLE (!) lights and the landing gear went down and immediately went back up - kind of a purple rain/when doves cry sort of a moment!)
I've mashed the wifi soft button repeatedly and tried to select a vehicle/camera, but my E90 never comes up as an option. I've turned the tablet wifi off and on via the settings menu - my home wifi appears (as do all of networks in the neighborhood, but my E90 is "out of range."
I've updated to the latest firmware on the ST16S, etc. But, of course, I have not updated the E90 since I can't communicate with it.
Is there something special that must be done after manual binding to get the camera functioning again? I've got a mapping job scheduled for tomorrow ... aaaaarrrgh!
Signed,
Frustrated in Colorado ...
My E90 is not communicating with me, my ST16S, or the rest of the world and I can't figure it out. If this situation has been addressed elsewhere I can't find it but would appreciate any links or other help.
So yesterday I tried out the manual bind procedure as described on p61 of the Owners Guide. It took a few attempts to get the timing and order of all the steps correct, eventually I was rewarded with 6 flashing yellow lights. Tried this a few more times and the results were inconsistent - sometimes the landing gear switch worked, sometimes it didn't. Sometimes I could arm the motors while in manual bind status, sometimes I couldn't. I did not attach the props nor did I even consider attempting to fly.
Today I'm trying to upload a survey mission that I created on the ST16S. When I turn on the H520 I get all the tones and lights, but my E90 never powers up - no movement at all. I've tried different SD cards, I've tried the "secret" button, I've swapped out batteries, I've turned the H520 off and on numerous times, I've removed and reattached the E90 gimbal. No luck. Sometimes when I'm wrestling with the gimbal or buttons I end up turning the H520 upside down and I get all six flashing yellow lights indicating manual bind status. (Twice when turning it upside down the landing gear have raised and then I tried all kinds of gyrations to get them back down - eventually they do, but I don't recall just what combination of dance moves led to success. Just now when I was trying to get the landing gear back down I got 6 flashing PURPLE (!) lights and the landing gear went down and immediately went back up - kind of a purple rain/when doves cry sort of a moment!)
I've mashed the wifi soft button repeatedly and tried to select a vehicle/camera, but my E90 never comes up as an option. I've turned the tablet wifi off and on via the settings menu - my home wifi appears (as do all of networks in the neighborhood, but my E90 is "out of range."
I've updated to the latest firmware on the ST16S, etc. But, of course, I have not updated the E90 since I can't communicate with it.
Is there something special that must be done after manual binding to get the camera functioning again? I've got a mapping job scheduled for tomorrow ... aaaaarrrgh!
Signed,
Frustrated in Colorado ...