Need help with H520e and controller

[Unpicked]

Hello could anyone assit me with the H520e Craft / ST16e Ground Station please.

 

[DoomMeister]

Welcome to YuneecPilots!

What issues are you having and what part of the world are you located in? Location plays a big part in finding parts and repair facilities at the present time.

 

[WTFDproject]

From PM, I think you need the DataPilot2 APK. Two versions are here. I believe you can then use the update system from within the APK to bring your entire system up to date if needed.
H520E

 

[Unpicked]

Hello can I ask where these updates for a specific area of the world. also has anyone got these updates? also can anyone tell me what app ould normally be on the unit. im not sure if PX4 would be on or anything else.... cheers

 

[DoomMeister]

Were you able to download and install the DataPilot2 app to your ST16e?

 

[h-elsner]

Yuneec made several changes in PX4 Autopilot for their drones (i.e. H Plus, H520, H520E). Do never use PX4 firmware from main branch. It will brick your drone. Be careful. Better to keep it as it is. What FW versions do you actually have?
A graet source for Yuneec firmware/software is Yuneecskins:

Yuneec Skins

All Products Yuneec Parts Yuneec Repair No-Fly Zone Release Yuneec Downloads Yuneec Decals Blade Chroma Parts

yuneecskins.com

 

[Unpicked]

 

[WTFDproject]

Hello can I ask where these updates for a specific area of the world. also has anyone got these updates? also can anyone tell me what app ould normally be on the unit. im not sure if PX4 would be on or anything else.... cheers

It is not clear what you are asking. Your screenshot indicates your controller is up to date with correct, current APP and is available to update the drone and camera when they are powered on and bound to the controller.
Are you asking about the 20 digit vrs 19 digit Operation ID?
Are you looking for stand-alone copies of the individual firmware items that may be different for a region different from yours?
Are you looking for binding guidance?
Something else?

 

[mrzub]

Yuneec made several changes in PX4 Autopilot for their drones (i.e. H Plus, H520, H520E). Do never use PX4 firmware from main branch. It will brick your drone. Be careful. Better to keep it as it is. What FW versions do you actually have?
A graet source for Yuneec firmware/software is Yuneecskins:

Yuneec Skins

All Products Yuneec Parts Yuneec Repair No-Fly Zone Release Yuneec Downloads Yuneec Decals Blade Chroma Parts

yuneecskins.com

Hi, with reference to this - do you know and can you recommend a reliable and trustworthy tool to upload Autopilot software to H520E /H520E RTK (Windows/Linux)?

 

[WTFDproject]

Hi, with reference to this - do you know and can you recommend a reliable and trustworthy tool to upload Autopilot software to H520E /H520E RTK (Windows/Linux)?

First, it is important to understand there is no such thing as a reliable and trustworthy tool to update any Yuneec product I am aware of.
If your system is operating normally and doing everything you need it to do, many would consider leaving it as it is rather than gamble loss of the system for no functional gain.

With that said, the normal update tool built into the versions page of the ST16e will update to the current version if the drone is bound to it. Use the button at the bottom of the page to check if you have the current versions installed, then install a new version if available.


The only other method I know of would be to try an SD card update if you have access to the required files. I have not tried an SD card update, and I do not know of a source for a complete set of update files.