Power boost of DT10+ transmitter

[tzanisgiannis12]

Hello,
Iam Giannis(John) and iam from Thessaloniki-Greece.
Iam an aeromodeller for more than 25years, also iam a certified drone's pilot and electronics engineer.

Regards
Giannis


View attachment 15678View attachment 15679View attachment 15680

I can understand the booster for 2.4GHZ(remote control)But why using booster for 5.8GHZ on ST10+ Tx? The ST10+ is only receiving 5.8GHZ, or not?

Thanks
Giannis
Thessaliniki-Greece.

 

[tzanisgiannis12]

I can understand the booster for 2.4GHZ(remote control)But why did you use booster for 5.8GHZ on ST10+ Tx? The ST10+ is only receiving 5.8GHZ, or not?
If we hane video receiving problem
we slould amplify the camera's output(on the drone and not on ST10+).


Thanks
Giannis
Thessaliniki-Greece.

 

[DoomMeister]

The camera commands for white balance, ISO, shutter speed, take photo, start/stop video, etc. are sent via the 5.8 GHz WiFi and the video stream is returned via the 5.8 GHz WiFi.

Glad to have you join YuneecPilots! You will find a lot of great information about your Q500 here, as well as many great pilots both commercial and hobbyist. We look forward to your interactions with the community.

 

[h-elsner]

If you talking about booster, what do mean? Something like Itelite? This is a better antenna which works/improves two-way. It's not an amplifier, only the antenna directional beam will be improved, means it will better receive and transmit the signals from this direction.

Also communication is two-way. You are right, the most IP-packets coming down from copter to ST10. But there is handshake thus some packets will go up plus those for control the camera.