Ruben Camacho Joined Nov 27, 2016 Messages 3 Reaction score 3 Age 60 Location Chicago Oct 29, 2017 #1 Anyone know the size Allen wrench size needed. To remove the lower body of the Typhoon H, I need to replace the lock clips located in the unit.
Anyone know the size Allen wrench size needed. To remove the lower body of the Typhoon H, I need to replace the lock clips located in the unit.
useitorloseit Joined Aug 25, 2017 Messages 40 Reaction score 6 Age 49 Location San Francisco Oct 29, 2017 #2 Hey Ruben they are 1.5mm for most all on outer body and not to be a jerk but be careful getting into it unless you know what your doing Reactions: htmclean
Hey Ruben they are 1.5mm for most all on outer body and not to be a jerk but be careful getting into it unless you know what your doing
V Vegasrobbi Joined Jun 9, 2016 Messages 215 Reaction score 102 Age 62 Oct 29, 2017 #3 This guy does a decent job at disassembly, I've had to replace my locks a couple times.
BobW55 Joined May 10, 2016 Messages 1,645 Reaction score 685 Age 69 Location Melvin Michigan, In the thumb Oct 29, 2017 #4 @Ruben Camacho Had to replace one of mine. I did NOT pull all the screws from the body. Just enough so I could get the old clip out and slide a new one in.
@Ruben Camacho Had to replace one of mine. I did NOT pull all the screws from the body. Just enough so I could get the old clip out and slide a new one in.