- Joined
- Jun 22, 2017
- Messages
- 88
- Reaction score
- 16
- Age
- 61
I have a Typhoon H plus with realsense and the CGO3+ on a ST16 all working great. It has the composite radio holder specifically made for the 16 and all the labels (aftermarket)
I also have a Typhoon H that I use for fishing and general flying that doesn’t have the realsense or a camera installed currently. It is running off another ST16
Both have Wizards Both working/ flying fine.
I have a 2 channel balance charger plus the original chargers that came with them
Both backpacks (actually 3 if you really want the 3rd) and original paperwork + important notes from the forum and other places that should be in the original but is not.
I also have the Goggles and Flight Sim Dongle and 3 good batteries.
I have 1 complete H and S16 that are disassembled but were working fine. Think of it as your complete replacement parts inventory. Even the Flight Controller that was ordered to replace one that was doing the GPS never acquired thing. I also have a disassembled CGO3+ that has had the IMU board replaced but hasn’t been reassembled due to time or the lack of free time.
There are extra arm clips and probably a few extra original parts that I am forgetting
Here is a breakdown of what is included:
3 – Typhoon H Drones 2 with Realsense (I actually just removed the realsense module since I never use it and didn’t want the battery drain. 4 screws would put it back on if you wanted the features) 2 flying in great condition and one complete drone for spare parts including the working FC unless you want to put it back together
3 - ST16(s) 2 working ST16(s) and one tore down for parts(or reassemble)
2 - CGO+ Gimbal cameras 1 very good condition and 1 disassembled....needs reassembled
1 - dual channel fast charger with balance adaptors for yuneec batteries
4 - batteries 1 new 3 older and puffy
1 - ST16 custom holder/harness
3 - Wizards 1 disassembled
2 - Backpacks or 3 depending if you want it.
1 -USB SIMULATOR
1 -SKYVIEW HD GOGGLES
You could probably part out the 1 and sell enough to pay for the other 2
I also have a Typhoon H that I use for fishing and general flying that doesn’t have the realsense or a camera installed currently. It is running off another ST16
Both have Wizards Both working/ flying fine.
I have a 2 channel balance charger plus the original chargers that came with them
Both backpacks (actually 3 if you really want the 3rd) and original paperwork + important notes from the forum and other places that should be in the original but is not.
I also have the Goggles and Flight Sim Dongle and 3 good batteries.
I have 1 complete H and S16 that are disassembled but were working fine. Think of it as your complete replacement parts inventory. Even the Flight Controller that was ordered to replace one that was doing the GPS never acquired thing. I also have a disassembled CGO3+ that has had the IMU board replaced but hasn’t been reassembled due to time or the lack of free time.
There are extra arm clips and probably a few extra original parts that I am forgetting
Here is a breakdown of what is included:
3 – Typhoon H Drones 2 with Realsense (I actually just removed the realsense module since I never use it and didn’t want the battery drain. 4 screws would put it back on if you wanted the features) 2 flying in great condition and one complete drone for spare parts including the working FC unless you want to put it back together
3 - ST16(s) 2 working ST16(s) and one tore down for parts(or reassemble)
2 - CGO+ Gimbal cameras 1 very good condition and 1 disassembled....needs reassembled
1 - dual channel fast charger with balance adaptors for yuneec batteries
4 - batteries 1 new 3 older and puffy
1 - ST16 custom holder/harness
3 - Wizards 1 disassembled
2 - Backpacks or 3 depending if you want it.
1 -USB SIMULATOR
1 -SKYVIEW HD GOGGLES
$1,750. plus shipping for everything.
You could probably part out the 1 and sell enough to pay for the other 2
Attachments
Last edited: