Upgrading some Q parts

[Northern guy]

I am looking for a suppliers or retailers name that can sell me a external camera antenna and one for the controller .

I have the Q500 drone
It came with a CG02 camera but I bought a new CG03 for it but don’t expect more range out of it compared to the 2
Carolina drones don’t have the parts .[emoji20]

 

[Steve Carr]

I am looking for a suppliers or retailers name that can sell me a external camera antenna and one for the controller.
I have the Q500 drone
It came with a CG02 camera but I bought a new CG03 for it but don’t expect more range out of it compared to the 2
Carolina drones don’t have the parts .[emoji20]

I would strongly recommend not moving the antenna on the camera. The risk of damaging the camera is significant and the gimbal may tend to vibrate.
The ST10 is a much better choice for the antenna mod. The Itelite is a good choice. There are a few Youtube videos documenting the mod.
ITELITE DBS Range Extender Antenna ITE-DBS01.5B Yuneec Q500 & Blade Chroma Black 680196958899 | eBay

 

[Northern guy]

Thanks for the advise .
Looks like I am still on the hunt as the link posted shows the kit but the seller don’t ship to Canada .

Again

 

[Northern guy]

This one looks to be the same model .This seller will ship up here .

 

[Steve Carr]

This one looks to be the same model .This seller will ship up here .

I would ask them if it includes the internal coax cables for the controller. If so you should be good to go.

 

[Northern guy]

Thanks

 

[Northern guy]

This was picture # 2
So I think I’m good
Any guess on the range I can expect after the install .

 

[Steve Carr]

I've done this mode on 3 ST10's and it works well. Just take your time. In particular drilling the holes can damage some parts if the drill bit gets caught and runs into a board. A step drill works best.

 

[Steve Carr]

Any guess on the range I can expect after the install .

In a rural area with no wifi nearby and a good line of sight you should easily get 2000' - 2500'. What are you getting now?

 

[Northern guy]

1100’