Upload ST16S firmware to ST16 controller to make it able for team mode
- Thread starter MaddionMax
- Start date
I'm not certain, but using the ST16 rather than an ST16s might cause some issues when flying. The ST16s was upgraded with a better processor and memory to make it compatible with the H520, H Plus and H3.
That said, the ST16 might be usable for controlling the C23 camera. I would not suggest using it to fly the aircraft.
Is that what you want to do?
That said, the ST16 might be usable for controlling the C23 camera. I would not suggest using it to fly the aircraft.
Is that what you want to do?
Your are absolutely right Steve! I would like to take the control of the C23 to somebody else, thats why I need firmware change. The basic ST16 not recognize C23.
I think @WTFDproject has made a PDF file on the procedure to do this. Sadly he won't be available for a few days for a medical procedure.
And this PDF of the procedure is published or just @WTFDproject has it? I try to contact with him, thank you Steve!
Will likely be a week or more.Thanks Steve, I sent PM to WTFDproject, maybe later he can help me.
Hope everything will be ok with him.
Is this PDF uploaded under a threat? Because than I try to find it.
I don’t think so. It was something he was working on privately as I recall.
Thanks @Steve Carr , I contacted with @WTFDproject and he gave me his infos. @WTFDproject thank you so much again that you shared with me!
Finally I was able to change firmware and the old ST16 now is an ST16S and works in team mode.
Finally I was able to change firmware and the old ST16 now is an ST16S and works in team mode.
Similar threads
