I usually land within about 30 seconds of the voltage readout hitting 14.5V As expected, as soon as I'm on the ground and kill the motors, I'll watch the voltage rise back up to around 14.7 or 14.8 since theres much less current draw.
But the one thing I noticed recently, was this idle voltage reading is still lower than what I read if I check the battery with a multimeter. I was trying to run one down to 15.4V to store it. I put it in the H and turned it on, and the controller read 15.4V but I had tested it at 15.6V. This was with the motors off. I let it sit for a while until the controller read 15.2V and when I tested the battery, it was at 15.4V.
So is my multimeter wrong, or does the H read batteries low?
But the one thing I noticed recently, was this idle voltage reading is still lower than what I read if I check the battery with a multimeter. I was trying to run one down to 15.4V to store it. I put it in the H and turned it on, and the controller read 15.4V but I had tested it at 15.6V. This was with the motors off. I let it sit for a while until the controller read 15.2V and when I tested the battery, it was at 15.4V.
So is my multimeter wrong, or does the H read batteries low?