Why is the image yawed in “Sensor information “ when the drone is straight?

[vmaxmasonrya]

I have been noticing the drone will not yaw to the right when I move the left stick to the right. I connected the drone to the GUI and I noticed the image is yawed when the actual drone is straight

 

[DoomMeister]

If you rotate the Q500 to the right (clockwise) does the image do so? 0 degrees should be Magnetic North.

 

[h-elsner]

Try the accelerometer calibration at calibration page and check yaw behaviour again.

 

[vmaxmasonrya]

If you rotate the Q500 to the right (clockwise) does the image do so? 0 degrees should be Magnetic North.

Yes if I rotate drone to the right the image rotated. So maybe the orientation is just in relation to true north?

 

[vmaxmasonrya]

Try the accelerometer calibration at calibration page and check yaw behaviour again.

Still the same after multiple recalibrations

 

[DoomMeister]

Actually Magnetic North. Set your phone’s compass to read Magnetic North and see if the aircraft is pointed that way when the sensor reads 0 degrees in yaw.