Hello Fellow Yuneec Pilot!
Join our free Yuneec community and remove this annoying banner!
Sign up

New profile posts

Well guys I did it again yep wrecked.1st was a TH tried fix it not knowing anything about anything googling this an that So I said scrw it and just bought another one. h+ landed against the same tree my question is where can I find these ribbon connections and boards one board is green and round and has ROHS and the ribbon says gimble and one wifi. One of the ribbons that twist inside there has a small RIP in it.
I am new to the foram. I am thinking about buying a refurbished yuneec typhoon q500 4k. thoughts and advice ?
Most of the people are afraid to say any sympathy word because of they thaught if anything wrong they said then it will be very embarrassing. Which is why I disclose my personal blog where you can find the proper word which you easily use for this kind of situations.
Cześć @celamko. jestem Tomek z Torunia. Opowiesz mi trochę dokładniej o tym co robisz? Chciałbym dać więcej zajęć moim latadłom i szukam czegoś poza filmowaniem nowych budów czy pejzaży. Absolutnie nie chcę wyciągać od Ciebie żadnych tajemnic. Sam latam Typhoonem H, Parrotem Anafi i jeszcze kilkoma DIY. Może jakiś kontakt poza forum? Mój mail na adres [email protected] . Pozdrawiam.
C
celamko
Cześć! Po tej stronie Konrad :)
Nie ma tu mowy o wielkich tajemnicach. Może zamiast opowiadać rozwlekle co robię, rzuć okiem na moją stronę: agisense.pl Może ona będzie lepszym punktem wyjścia do dalszych pytań :)
Budowy brzmią fajnie. W moich stronach Ten segment opanowali dawno panowie z DJI-ami i trudno się wbić więc poszedłem badziej w mapowanie i kartografię.
Mój mail to: [email protected]
Hi and thank you for the feedback regarding controlling another aircraft with my ST16, would you be interested/able to do the same for me please as I wish to use a spare ST16 to control another craft, happy to reimburse you for your time.
Hello Members, with the new drone law banning the use of foreign drones for use in government contracts, does this mean we can't use any Chinese drones like Dji and Yuneec to do work. Here is a link worth noting.

I have a spare aluminum vertical arm for CGO3+ camera. I would take $35 for it shipped. New these are about $72.
Curious to what flight time you get with the Q500 4K. Thinking of also getting one but some say flight time isn't near the 30 min. area.
BigRHS
BigRHS
I have been getting around 12 minutes of flight time on average. If it's not windy I may get another minute or 2 more, but if it's windy I get less. Some are getting better times buying higher complicity batteries, but still nowhere near the 30 minute time.
BACK TO THE REBUILD,BACK TO POINT ZERO! SO DURING MY REBUILD I DECIDED I WOULD PLUG THE BATT IN TO TEST MY WORK(WTF),WITHOUT THE BATT CAGE!! THAT'S RIGHT,"IT CAUGHT ON FIRE". SO NOW I AM IN NEED OF A MAIN BOARD TO GET STARTED AGAIN. ANYONE HAVE ANY IDEA OTHER THAN PAYING 200.00 AND WAITING WEEKS?
Hi
I seen where you were interested in a replacement CGO3a few weeks ago and wasn't sure if you were able to find one or not
I just posted one for $200 shipped
it binds to controller but doesn't do anything when selecting calibrate Gimbal nothing happens .
when the camera gets power the gimbal goes from 45 deg left to 45deg right back and forth ..
I hope ive not imposed on you , and look forward to hearing your thoughts , they are greatly appreciated .. My son and i cant wait to get flying her
S
simonmac
As mentioned to Steve if i cant fix it , we will just use it as a fixed camera type thing , like an fpv and just enjoy flying it ;)
WTFDproject
WTFDproject
I'm working on a post on your new thread. I'm slower than most folks, but please be patient. I'm looking for a couple pictures I want to show you.
S
simonmac
Take as long as you like, i'm thankful your spending any of your time at all helping me.
Hi sorry follow on to that .
I have powered the camera externally as the mainboard k fuse has blown, the pwr white wire and the green tx wire are still connected to the drones slide mount connector, I have checked all wires for continuity and there all good.
The gimbal main board light is solid green and the camera led is flashing green.
Hi i wonder if you can help me. A person on a Yuneec facebook group recommended i ask you as your the man in the know . thanks in advance .
Issue is I dont have any control of my pan and tilt on my Yuneec h with cg03+ camera .. and the st16 controller
I have recently bought the drone and it turns out It had been crashed !! as the camera wouldnt power on, Everything works, the video signal etc .

New Threads

Forum statistics

Threads
17,143
Messages
200,403
Members
19,825
Latest member
zotlar