- Joined
- Dec 8, 2017
- Messages
- 11
- Reaction score
- 0
- Age
- 50
Hi,
Tried to use a Turnigy ACCUCELL 6 charger and a Yuneec balance lead for my Typhoon H battery. Everything seemed to go well, Amp set to 5.4, four cells selected for 14.8V.
I can't honestly say if I selected balance or just charge. I did scroll through the menu during the charge and the cells very within 0.01 of each other.
My flight time was only 2mins before the first battery warning. I landed straight after.
Setting up on the charger again - all settings current. I did notice that the current draw or input to the battery was only 3.2 amps and not 5.4 amps which I have seen on tutorial videos.
I am back to using the standard charger for now any ideas what is going wrong?
The balance charger is connected to a 240volt domestic - 200w 12v supply.
Cheers.
Tried to use a Turnigy ACCUCELL 6 charger and a Yuneec balance lead for my Typhoon H battery. Everything seemed to go well, Amp set to 5.4, four cells selected for 14.8V.
I can't honestly say if I selected balance or just charge. I did scroll through the menu during the charge and the cells very within 0.01 of each other.
My flight time was only 2mins before the first battery warning. I landed straight after.
Setting up on the charger again - all settings current. I did notice that the current draw or input to the battery was only 3.2 amps and not 5.4 amps which I have seen on tutorial videos.
I am back to using the standard charger for now any ideas what is going wrong?
The balance charger is connected to a 240volt domestic - 200w 12v supply.
Cheers.