- Joined
- May 30, 2016
- Messages
- 198
- Reaction score
- 124
so I finally bought some Deans connector. I will design the holder so you can easily press those stock deans connector into the 3d printed part solder the battery leads to them and then plug the battery into the typhoon.
of course on one side you would only need half of a regular dean connector so one port will not be connected but i think it is the simplest way to integrate good connectors into the 3d printed part.
Andy
of course on one side you would only need half of a regular dean connector so one port will not be connected but i think it is the simplest way to integrate good connectors into the 3d printed part.
Andy