Hi all, long time browser, first time poster. Looking for advice on how bad things are with this. I was showing someone how to fly my typhoon and they made a "pilot error" which resulted in the drone clattering off a tree and into a fresh water lake. I got it out after about 10 seconds at most. The lights were still on, and it was making that distress beep they do when they go down. It wouldn't turn off via the on/off switch, so I pulled the battery. I took it home and placed it by the lit stove to dry it out, before placing it beside a dehumidifier for the night.
Woke up this morning and put a battery in to see if it was alive/dead, and it powered up but the LED indicator at the rear was flashing red and it was making a 3 tone beeping noise (high, middle, low low low). And two of 6 rotor LED are not lighting Looking on here it seems it has failed to initialize. I also got no telemetry on the st16.
Before I think about binning it, is there any hope for a resurrection?
If not, is it worth keeping for spare parts? Any and all advice is appreciated!
Scone
Ireland
Woke up this morning and put a battery in to see if it was alive/dead, and it powered up but the LED indicator at the rear was flashing red and it was making a 3 tone beeping noise (high, middle, low low low). And two of 6 rotor LED are not lighting Looking on here it seems it has failed to initialize. I also got no telemetry on the st16.
Before I think about binning it, is there any hope for a resurrection?
If not, is it worth keeping for spare parts? Any and all advice is appreciated!
Scone
Ireland