WTFDproject

RPG · Thursday at 8:29 PM

I'm on my last camera repair, a e90 that powers up with video. The light on the front of the camera flashes green with a constant beep. The camera is tilted and moves back and forth a little . any Ideas?

giorgio · Oct 9, 2024

Salve avete quelche link per acquistare un anello di contatto per la cgo4? Grazie

Scott pnuman · Jul 25, 2024

i cant get the camera to bind with the controler it seems one will bind but the other one won't the camera on the drone is not on the list when you bind them i really want this thing to be more than aqn800 paperwweight

RudaR · Apr 4, 2024

Jak poznám datový kabel. Proč není označen. Já mám hodně kabelů. Já jsem měl problémy.

paul1 · Feb 20, 2024

Hi I live in UK and have been trying to find gui for my chroma blade and can't seem to find it anywhere just want to check drone and raise height restriction to about 100 feet I'm completely new to this so have zero knowledge how the firmware works

DaveedL · Dec 29, 2022

After doing a system reset on my St10+ Controller, I'm unable to bind my Q500 4K. The drone model isn't displayed for me to select on the Controller. I can put the Q500 4K into bind mode, however it never connects. I also tried to update the firmware using the Q500 Gui and I'm unable to connect. It displays a message that there is no response from the quadrotor....

rchrdbarnard2 · Jan 10, 2022

Im haveing problems with data pilot and uav toolbox crashing. I have uavtoolbox installed on my ST16 and laptop. I have data pilot on my laptop, and also an android emulator. Data Pilot wont even boot up. UAV toolbox on my ST16 crashes when I try to plan a mission, and the mission block on my laptop wont activate. Am I doing something wrong or what?

FlexK9 · Dec 1, 2021

Would you by any chance know where I can find the last firmware update software that was provided by Yuneec for the St-10+? This is being used with a Typhoon Q500+. Thank you
Peter

jared fettig · Nov 12, 2021

Hi to all. So I have fixed/repaired just about everything known to man. So a friend gave me a Breeze 4k drone and an extra parts drone and circuit board for the eyes, along with all kinds of extras. . what I need now Is the lateset firmware for the breeze I can get. this quad has never had an update.

Videomarketingdone · Oct 6, 2021

Hello WTFDproject. Short question: Can I downgrade the firmware of the gimbal from v1.27 to V.1.25?

KpossaDrones · Aug 7, 2020

I've done what you suggested for the Q500 which I also have, on the Chorma, so have a Typhoon H named Chroma. But it won't recognize the Cam Cg03. Not sure if t's binding to Chroma. Without cam its moot. Will upgrade the SD card and see, as it says update error on Cam. Works fine on ST10. Seems like it recognised signal from a MK58. Perhaps hook a GoPro and see.

johnnyb57 · Jul 14, 2020

I believe I'm ready to go ? I've got build 777 for the C23, And app (drone) yes

simonmac · Oct 16, 2019

it binds to controller but doesn't do anything when selecting calibrate Gimbal nothing happens .
when the camera gets power the gimbal goes from 45 deg left to 45deg right back and forth ..
I hope ive not imposed on you , and look forward to hearing your thoughts , they are greatly appreciated .. My son and i cant wait to get flying her

simonmac · Oct 16, 2019

Hi sorry follow on to that .
I have powered the camera externally as the mainboard k fuse has blown, the pwr white wire and the green tx wire are still connected to the drones slide mount connector, I have checked all wires for continuity and there all good.
The gimbal main board light is solid green and the camera led is flashing green.

simonmac · Oct 16, 2019

Hi i wonder if you can help me. A person on a Yuneec facebook group recommended i ask you as your the man in the know . thanks in advance .
Issue is I dont have any control of my pan and tilt on my Yuneec h with cg03+ camera .. and the st16 controller
I have recently bought the drone and it turns out It had been crashed !! as the camera wouldnt power on, Everything works, the video signal etc .

bigfoot65 · Jul 19, 2019

I have a typhoon q500 4k. I was gonna do the firmware to it and I cant plug it into the wiring harness of the drone to the plug that goes to computer . I had noticed that there are 4 wires hanging with no plug on end. is there a diagram that tells me where thes wires go in to the plug that was still connected to the other end?