Recent content by davidep

This is the log of my last flight with H520 during a photogrammetric mission (1-4-2021) after a firmware update... the same evening the touch display on st16s get broken. Now I waiting the repair center sent it back and I'll try again when the uas is back..

Thank you for your reply. The area was very quiet and not congested... (see photo). About the display now I sended it to repair but is very strange that is already broken because I always use It in a very delicate way. I hope I made a good choice buying Yuneec H520 to work...

This are the messages on the RC and the log on AIRDATA (while flying in a photogrammetry mission). The mission is ended normally but the same evening the display of the RC get broken (become very dark the left side with strange colours)... It is very strange and I don't think there is a relation...

Great! Thank you.

I need for my “operations manual”

Somebody knows the pitch value of the H520 propeller? 10"/...?

For my kind job I had to give back the H+ and I bought a H520.

but if you buy the 520 main board the right firmware is pre installed maybe?

I've seen this on a yuneek spare part catalog. Same code...

I think the main board are the same, infact if you buy a new mb the spare part code are the same. Maybe is only a firmware difference. On the drone there is a mini usb port. Is for what?

It seems is almost impossible to use h520 mapping program on H plus than...

If the main board are different is difficult or impossible. But maybe they are not so different and somebody has found the sistem to flash the 520 firmware in to the h puls mainboard. The two aircraft are really identical except the colour... maybe also the main board is the same only with...

Somebody told me it was possible simply changing the software in the ST16S.... but I undersand that is not possible than... . Thank you.

so the photogrammetry program will not work? Thank you

Sorry for my english. Just for information out of curiosity: if I install the H520 firmware on a St16S controller, the mapping program (photogrammetry) will work (as create a grid on a map view, trigger the camera, overlap, ecc.) on a Typhon H plus with a C23 camera? Thank You.