Hello Fellow Yuneec Pilot!
Join our free Yuneec community and remove this annoying banner!
Sign up

Breeze transplant and repair!!!

Joined
May 16, 2021
Messages
60
Reaction score
8
Age
43
Well am now going to replace a slightly damaged IPS or the lidar board as the Yuneec Breeze Training repair video calls it. Also resolder the rear motor output socket. Will you date with more pics as it progresses , chack back for updates and if any questions please ask away. I am not an expert on these things but have a pretty good electronic and computer background and also have watched any video or read and kinda of information in the breeze I could find and if I don't know this forums is full of great ppl that have knowledge and experiance with these that may have the answer if u can't get u one.
 

Attachments

  • 16258789737218361226908127092085.jpg
    16258789737218361226908127092085.jpg
    1.1 MB · Views: 10
  • 20210709_205648.jpg
    20210709_205648.jpg
    1.2 MB · Views: 11
  • 20210709_205657.jpg
    20210709_205657.jpg
    3.4 MB · Views: 10
  • 20210709_205738.jpg
    20210709_205738.jpg
    1.5 MB · Views: 11
  • 20210709_205741.jpg
    20210709_205741.jpg
    1.3 MB · Views: 9
  • 1625879302983259883783246977429.jpg
    1625879302983259883783246977429.jpg
    1.7 MB · Views: 10
Joined
May 16, 2021
Messages
60
Reaction score
8
Age
43
Well got a little busy the last few weeks and finally today had an hour to mess around with this and got the rear motor output socket reattached and gotta just fix the solder on the edge a little.
As for the ILS/IPs board I am going to attach with some extension leads sense this is the third time I've knocked it off the stupid factory design. They definitely didn't plan that part out to well lol.
I was going to fix the solder up on those extensions but since they aren't shorted and are very solid I'm going to leave well enough alone lol.
Tomorrow I'll attach the board and a few more pics of progress
 

Attachments

  • 20210722_202233.jpg
    20210722_202233.jpg
    2 MB · Views: 5
  • 20210722_202625.jpg
    20210722_202625.jpg
    1.4 MB · Views: 5
  • 20210722_211208.jpg
    20210722_211208.jpg
    1.3 MB · Views: 5
Joined
May 16, 2021
Messages
60
Reaction score
8
Age
43
Well after two hours realized I had the **** wires on one side of the IPS backwards ? but we are all good now and the liquid tape is sealing and it's not going to snap off a 4th time !!!
Yeah I know I went a little crazy with the liquid electric tape but it comes off in on piece and doesn't really bond to the electronics , I tested it be ause it wasn't the usual stuff I use but it works the same. It will keep the four solder points on both boards pretty much in place allowing the drone to take a pretty good amount of force from a crash and not break the small solder points tomorrow I'll take some pics of it going back together and hopefully some pics from the air and a movie from it also!!
 

Attachments

  • 20210723_213425.jpg
    20210723_213425.jpg
    1.5 MB · Views: 9
  • 20210723_213357.jpg
    20210723_213357.jpg
    1.1 MB · Views: 9
  • Screenshot_20210723-215302_Breeze Cam.jpg
    Screenshot_20210723-215302_Breeze Cam.jpg
    1 MB · Views: 9
  • Like
Reactions: h-elsner

New Threads

Members online

Forum statistics

Threads
20,306
Messages
235,199
Members
25,203
Latest member
HM Solutions