Hello Fellow Yuneec Pilot!
Join our free Yuneec community and remove this annoying banner!
Sign up
Joined
Dec 2, 2018
Messages
831
Reaction score
332
Age
73
Can't seem to get a new cg03 to connect with the st10t or the s12. Camera says not connected. It slid on nicely and all is well because the camera did move up and down.
 
Camera tilt is going via 2.4GHz ZigBee RC-Connection. But all other camera-related stuff is done via 5GHz WiFi.
That means:
- Is the camera bound correctly to the RC?
- If binding is not possible, is the camera hotspot visible in another device (tab, notebook or mobile with 5GHz WiFi)? I use WiFi Analyzer to check this out.
- Is the status LED on the front of the cam visible? If yes, what color codes are going on?

Status LED codes on my CGO3 are as follows:
1) Normal procedure:
Switch on: white for a short time
Initializing: red
Gimbal initializing: white/red blinking (usually one time)
Ready to bind: green blinking
Bind successful: green
Foto: blue
Video: blue/green blinking

2) Without SD-card:
Switch on: white for a short time
Initializing: red
Gimbal initializing: white/red blinking (longer time)
No SD-card: white blinking

3) Camera not connected:
Switch on: white for a short time
Initializing: red
Gimbal initializing: white/red blinking (usually one time)
Ready to bind: green blinking

br HE
 
  • Like
Reactions: Steve Carr

New Posts

Members online

Forum statistics

Threads
20,955
Messages
241,599
Members
27,284
Latest member
csandoval