- Joined
- Mar 9, 2016
- Messages
- 280
- Reaction score
- 50
- Age
- 59
Yesterday evening i downloaded the latest firmware versions of the typhoon H and ST16
Typhoon H Firmware EU V3.01 from 16.11.2016
versions: Gimbal:v1.25, Autopilot:v1.30, Camera:v3.2.26
ST16 firmware version V03.01.b27 from 16.11.2016
Until now i never had any problems with the ST16 and the Typhoon H Advanced
i always do the update the old way the Typhoon H firmware first on a micro SD card and in the camera.
Startup the ST16 and the Bird and first do a Typhoon H upgrade
After that i do the update of the ST16.
Since version 3.00 you can do a online upgrade
thats what i did yesterday evening
i first updated the ST 16 an then did a online update from the ST16 to the Typhoon H.
I did some small tests except flying and it seemd to work.
Today afternoon i was ready for flying and i had 2 major problems
first sometimes my video streaming was freezing, but i could still move the gimbal.
second problem is that i have all the connections and status on the ST16 i can move the Gimbal and after pushing the red button. sometimes the typhoon H is arming. But i get no reaction of the sticks.
Small info i also changed the expo settings on J2 - J3 - J4, But did not touch the J1 yestery evening (i have mode 2 on the ST16)
could it be that those expo settings are the reason why i get no response from my sticks. If i go into the Monitoring i see everything moving on the ST16.
Another small info i still have the old ST16 with 2 external antennas.
Good this is i think i made a copy of the model before changing the expo settings.
I will try to select the copied model and will try it.
if someone has an idea let me now
i think i will never do a online update again ... the old way is the best ...
Marnix Verschraegen
Belgium
Typhoon H Firmware EU V3.01 from 16.11.2016
versions: Gimbal:v1.25, Autopilot:v1.30, Camera:v3.2.26
ST16 firmware version V03.01.b27 from 16.11.2016
Until now i never had any problems with the ST16 and the Typhoon H Advanced
i always do the update the old way the Typhoon H firmware first on a micro SD card and in the camera.
Startup the ST16 and the Bird and first do a Typhoon H upgrade
After that i do the update of the ST16.
Since version 3.00 you can do a online upgrade
thats what i did yesterday evening
i first updated the ST 16 an then did a online update from the ST16 to the Typhoon H.
I did some small tests except flying and it seemd to work.
Today afternoon i was ready for flying and i had 2 major problems
first sometimes my video streaming was freezing, but i could still move the gimbal.
second problem is that i have all the connections and status on the ST16 i can move the Gimbal and after pushing the red button. sometimes the typhoon H is arming. But i get no reaction of the sticks.
Small info i also changed the expo settings on J2 - J3 - J4, But did not touch the J1 yestery evening (i have mode 2 on the ST16)
could it be that those expo settings are the reason why i get no response from my sticks. If i go into the Monitoring i see everything moving on the ST16.
Another small info i still have the old ST16 with 2 external antennas.
Good this is i think i made a copy of the model before changing the expo settings.
I will try to select the copied model and will try it.
if someone has an idea let me now
i think i will never do a online update again ... the old way is the best ...
Marnix Verschraegen
Belgium