Problem with ST 16

Marco Romano · Jun 29, 2018

Good evening to everyone.
Sorry but I'm a beginner.
I have a Typhoon H, but the FLIGHT MODE app does not appear on the remote control.
The calibration does not return a positive result.
Do you have any advice?
Thanks to everyone who will answer

rdonson · Jun 29, 2018

Hello Marco,

What do you see on the ST16?

Marco Romano · Jun 30, 2018

rdonson said:
Hello Marco,

What do you see on the ST16?

Hi rdonson
thanks for the reply. I see this:

and I don't see this App

Also during calibration, the J2 stick does not respond

Dustoff · Jun 30, 2018

Have you pressed the home key on the controller ? That should
Put you in flight mode

Marco Romano · Jun 30, 2018

grazie mille.
Premendo il pulsante Home ritorna normale.
Ma continuo a non vedere l'app

rdonson · Jun 30, 2018

“thank you so much.
Pressing the Home button returns to normal.
But I still do not see the app“
- Google Translate -

What do you mean by “ normal”? The Android interface? The standard Yuneec ST16 screen?

rdonson · Jun 30, 2018

Marco,

Are you saying you can't get back to see the normal Yuneec screen as shown below?

View media item 747

Dustoff · Jun 30, 2018

rdonson said:
Marco,

Are you saying you can't get back to see the normal Yuneec screen as shown below?

View media item 747

Btw like the labels you put on your controller

rdonson · Jun 30, 2018

Dustoff said:
Btw like the labels you put on your controller

http://www.uavstickers.com/store.php#!/Typhoon-H-Identity-Set/p/76119187/category=21640734

and my labeler....

They've been a big boon especially when I step away from flying for a while. They also serve to help with pre-flight.

Eagle's Eye Video · Jun 30, 2018

My single issue with the stickers they sent you is the "Land when voltage below 14.1V"... as if you have a choice, if waiting until 14.1V

rdonson · Jun 30, 2018

I agree EEV. Since the photo was taken I've used my labeler to overwrite that to read 14.7 (I'm probably a bit over cautious)

Marco Romano · Jun 30, 2018

[QUOTE = "rdonson, post: 138964, membro: 10662"] Marco,

Stai dicendo che non puoi tornare a vedere la normale schermata di Yuneec come mostrato di seguito?

[GALLERY = media, 747] IMG_6774 di rdonson pubblicato 13 aprile 2018 alle 2:51 PM [/ GALLERY] [/ QUOTE]
No....I see

rdonson · Jun 30, 2018

Marco, quindi non capisco il tuo problema.

aiutami a capire

———-

Marco, then i don’t understand your problem.

help me understand

Dustoff · Jun 30, 2018

me too ???

FlushVision · Jul 1, 2018

rdonson said:
I agree EEV. Since the photo was taken I've used my labeler to overwrite that to read 14.7 (I'm probably a bit over cautious)

Each to whatever makes them comfortable. For me, 14.7 is a little on the cautious side. I like to aim for 14.5. I'm comfortable with that

Marco Romano · Jul 1, 2018

[QUOTE = "rdonson, post: 139007, membro: 10662"] Marco, quindi non capisco il tuo problema.

aiutami a capire

----

Marco, quindi non capisco il tuo problema.

aiutami a capire [/ QUOTE]

Il mio problema è questo

Quando uso il Typhoon, non decolla

rdonson · Jul 1, 2018

Marco Romano said:
[QUOTE = "rdonson, post: 139007, membro: 10662"] Marco, quindi non capisco il tuo problema.

aiutami a capire

----

Marco, quindi non capisco il tuo problema.

aiutami a capire [/ QUOTE]

Il mio problema è questo
View attachment 10146

Quando uso il Typhoon, non decolla

What Marco says: My problem is When I use the Typhoon, it does not take off

Marco:
Are you in a "No Fly Zone"?
Are you using "Smart Mode"?
Are you trying to use the Yuneec GUI?

Sei in una "No Fly Zone"?
Stai usando "Smart Mode"?
Stai cercando di utilizzare la GUI Yuneec?

Dustoff · Jul 1, 2018

rdonson said:
What Marco says: My problem is When I use the Typhoon, it does not take off

Marco:
Are you in a "No Fly Zone"?
Are you using "Smart Mode"?
Are you trying to use the Yuneec GUI?

Sei in una "No Fly Zone"?
Stai usando "Smart Mode"?
Stai cercando di utilizzare la GUI Yuneec?

Still can’t understand what he is trying to say

rdonson · Jul 1, 2018

Dustoff said:
Still can’t understand what he is trying to say

Marco's last response was: My problem is When I use the Typhoon, it does not take off

I'm not sure why he keeps referencing the graphic from the calibration screen...