Hey Pilots,
I have some questions regarding the CGO3 camera.
1. Sometime the camera will disappear after replacing the battery of the H on the field. I remember there were some post mentioned before but I can't see any updates. In my case, the CGO3 camera sometime will disappear after replacing the H battery on the field. My ST16 keeps turn on through the whole time, what I did is switch off the H, replace battery, turn on the H. The RC connection will easily hook up, but the WIFI just keep connecting and seems never done (waiting for 10-15min). Go into the system tab, the CGO3 camera is not there. Sometime restarting the H will work, but sometime it doesn't. If restarting doesn't work, I have to remove all the props, shut down the H and ST16, then turn on the H first, then ST16, and try if it could hook it up or need a rebinding to the base (exactly the CGO3 camera binding procedure mentioned in the manual). Anyone have a better idea or solution to minimize the chance that lose the CGO3?
[UPDATE: I got a nice reply from other member that I should better shut down the ST16 together with TH and restart them after the battery swap, will do that on next flight ]
2. Camera not pointing forward at the FollowMode (pan switch UP position) and/or no response to rotation to the pan knobs. This mostly happen after I do a compass calibration, the camera mostly will sitting somewhere wrong. For fixing, what I will do is switch off and on again the H after compass calibration....
Any pilots have the similar situation, do you have a better fix or some way to prevent them to be happened??
Welcome to discuss!
I have some questions regarding the CGO3 camera.
1. Sometime the camera will disappear after replacing the battery of the H on the field. I remember there were some post mentioned before but I can't see any updates. In my case, the CGO3 camera sometime will disappear after replacing the H battery on the field. My ST16 keeps turn on through the whole time, what I did is switch off the H, replace battery, turn on the H. The RC connection will easily hook up, but the WIFI just keep connecting and seems never done (waiting for 10-15min). Go into the system tab, the CGO3 camera is not there. Sometime restarting the H will work, but sometime it doesn't. If restarting doesn't work, I have to remove all the props, shut down the H and ST16, then turn on the H first, then ST16, and try if it could hook it up or need a rebinding to the base (exactly the CGO3 camera binding procedure mentioned in the manual). Anyone have a better idea or solution to minimize the chance that lose the CGO3?
[UPDATE: I got a nice reply from other member that I should better shut down the ST16 together with TH and restart them after the battery swap, will do that on next flight ]
2. Camera not pointing forward at the FollowMode (pan switch UP position) and/or no response to rotation to the pan knobs. This mostly happen after I do a compass calibration, the camera mostly will sitting somewhere wrong. For fixing, what I will do is switch off and on again the H after compass calibration....
Any pilots have the similar situation, do you have a better fix or some way to prevent them to be happened??
Welcome to discuss!