h-elsner
Premium Pilot
- Joined
- Mar 23, 2016
- Messages
- 2,312
- Reaction score
- 2,044
- Location
- Bavaria / Germany
- Website
- h-elsner.mooo.com
To avoid unnecessary error messages for ST10 I would need the following default value array:
0x55 0x55 0x26 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0F 0x61 0x15 0x10 0x02 0x00 0x28
(This array is without placeholder for CRC8 at the end)
Attached a telemetry from Q500/ST10 that shows possible values for status bytes.
br HE
0x55 0x55 0x26 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0F 0x61 0x15 0x10 0x02 0x00 0x28
(This array is without placeholder for CRC8 at the end)
Attached a telemetry from Q500/ST10 that shows possible values for status bytes.
br HE