I had a hard landing on my 4K and broke one of the landing skids. I've ordered a new skid and know how to change it but what size/style of tool do I need? My old eyes just can't see the screw head that well.
Bob
Bob
Tool needed?
- Thread starter BobR
- Start date
- Joined
- Dec 19, 2015
- Messages
- 379
- Reaction score
- 89
- Age
- 55
You need a Hex-Tool 2mm size
Your Q500 only have 1,5 and 2mm Hex-Screws
Your Q500 only have 1,5 and 2mm Hex-Screws
Entire Q500 list -
-6pt hex-small phillips
-small needle nose pliers
-solder sucker
-50-60w soldering iron
-6pt hex-small phillips
-small needle nose pliers
-solder sucker
-50-60w soldering iron
- main body = 2mm
- inner body to wings = 2mm
- outer wing assembly 1.5mm
- battery holder = 1.5mm
- battery contacts holder = 2mm
- wing light covers = small phillips
- motors = 2mm
Thanks, because I'm setup for circuit board repair, I have all of those items except the hex driver. However, I haven't looked for one in my tool drawer so there might be one there. I'm waiting for the skids I ordered to arrive, so have time to look.
Bob
Bob
That's handy if you have to change out the body - you have to desolder the ESC boards to the motors to remove them.
