Hello Fellow Yuneec Pilot!
Join our free Yuneec community and remove this annoying banner!
Sign up

Trembling videos ?

Joined
Jun 4, 2016
Messages
336
Reaction score
282
Age
55
Hi, since a few days, my videos are trembling (micro vibrations).
I have calibrated everything I can, I have changed the propelers, but nothing changed.

Do I have to change the dampers of the gimble ?
Do I have to re-screw something ?
Who has got that problem ?
Who has got a solution ?

thank you !!!!
 
Last edited:
It would help if you post a video of the problem.
Do you see the landing gear shaking more than normal? Have you inspected the props very carefully for nicks or chips?
Did you look carefully at the rubber gimbal dampers to make sure they are fully engaged?
 
Hi, since a few days, my videos are trembling (micro vibrations).
I have calibrated everything I can, I have changed the propelers, but nothing changed.

Do I have to change the dampers of the gimble ?
Do I have to re-screw something ?
Who has got that problem ?
Who has got a solution ?

thank you !!!!
Has this always been doing this since it was new or did it just start doing this? With the landing gear down and you pan around
you can see the legs vibrating some but your video should be relatively stable. As for props I have found all the props
A or B are heavy on the side that the letter is printed on. Can you put up a video?
 
No it's my 30th flight. It has begun to shake since 2 or 3 days... no shock, no crash...

Video here :
To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
 
Definitely has jello. Looks like maybe Black Cherry. Sorry, couldn't pass it up.
Back to the question about inspection. Do the props and dampers look good. Also check for end play and side play on each motor shaft. Check the bird for any loose parts and check all the screws to make sure they are snug.
 
All good advice. If it all checks out OK then I would call yuneec and send them a link to that video so they can see themselves.
 
No it's my 30th flight. It has begun to shake since 2 or 3 days... no shock, no crash...

Video here :
To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
mine does the exact same thing....i tried everything....i already sent it back to yuneec once and now its on its way back again.....this time i want it swapped for a new one.....
 
Perfect flight this morning after I changed one prop. Hope that was it !
To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
Nice. Looks like that did it.
 
Perfect flight this morning after I changed one prop. Hope that was it !
To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
Lovely vid Eric. Thanks for sharing.
 
Nice video! Thnx
 
Nice you found your problem.
 
Very nice, sometimes just the littlest things can cause havoc, usually someone in the forum has seen the problem and has an answer.
Great bunch of people in here. I consider everyone in here a friend.
 
Not flying a H, but on my Q500 4k I would sometimes get noticeable jello on windy days.
Is there any correlation between when you notice the trembling and how windy it is?
 
Not flying a H, but on my Q500 4k I would sometimes get noticeable jello on windy days.
Is there any correlation between when you notice the trembling and how windy it is?
I don't think because a few days before my trembling videos, I was filming with a wind of 20 knots and had no problem at all
 
Remedy, you have a good quad, a good camera and it appears some experience with both of them. If you are getting shake it wouldn't be a bad idea to balance the blades. Ahh the sound of rotors in the morning.
 

New Posts

Members online

No members online now.

Forum statistics

Threads
21,349
Messages
245,920
Members
28,303
Latest member
Cj42804