two controllers

[X-Fly]

Hy,

Is there a way to have two master-controllers, so that two pilots could controll the vehicle ?

As for know I could investigate, or, it is master / slave, with the slave only to be able to take-off, return home and controll the camera, of to have two masters, from wich the second one just is a spare that will take over if signal is lost, but, you can't do anything with it unless the primary master has gone offline.

It would be great to have two pilots have controll ...

 

[AeroJ]

Is there a way to have two master-controllers, so that two pilots could control the vehicle ?

Yes, but not in the way you describe. Team mode allows one person to operate the camera and another person to pilot the craft. There is no way for 2 pilots to fly the same machine.

 

[RkamilC]

There is imposiible and senseless to control with two gimbals/sliders the same channel e.g. pitch of H520.
But you can control camera settings by two separate wi-fi connections by cgi commands: something about that here: link
Also with Team/Slave both controllers have option to start mission.

 

[X-Fly]

Yes, but not in the way you describe. Team mode allows one person to operate the camera and another person to pilot the craft. There is no way for 2 pilots to fly the same machine.

This should become a feature-request, no ?

 

[X-Fly]

There is imposiible and senseless to control with two gimbals/sliders the same channel e.g. pitch of H520.
But you can control camera settings by two separate wi-fi connections by cgi commands: something about that here: link
Also with Team/Slave both controllers have option to start mission.

Cool, but quiet not what I am looking for ... But, thx for sharing, might be interesting for future purposes.

 

[claudius62]

But mission impossible. Each radio has its binary coding between it and the receiver.
The receiver (on the same channel) will not accept any order from another radio. Security requires or it would be the only way on to send the aircraft to the carpet. This is valid for both Yuneec, dji etc. Including radio-controlled aircraft.

 

[X-Fly]

But mission impossible. Each radio has its binary coding between it and the receiver.
The receiver (on the same channel) will not accept any order from another radio. Security requires or it would be the only way on to send the aircraft to the carpet. This is valid for both Yuneec, dji etc. Including radio-controlled aircraft.

I do not agree. You can have two controllers connected to one H520. The last one that connects to it is not able to do anything (just showing video), but, shutdown the first one, and the second-one will become master. Try it, it works. There must be a way to have two masters.
PS : Try it, but maybe, without props if you are unsure