New profile posts

Hi Folks! I'm back..

I have a typhoon H with a CG03+ camera. I had a motor failure and the unit came down and hit on the camera (gear failed to come down). I can find most of the parts except for the round Gimbel Board. Any idea where I can find this?

Searching for Answers. I have a Yuneec Typhon H and the drone has started alternating power from motor to motor. Any idea what is causing this and can I fix myself?

I have a dilemma. My sons H flies fine; however it doesn't want to land. It will SLOWLY descend and at about 6-8 ft. it descends no more. He has taken to flying back and forth with the thrust/yaw stick full down until about 1 ft. off the ground and then holding the start/stop button. It drops but it is on soft grass. I have gone through all settings, calibrations and all shows nominal (ok).

Hi Pöllö! I can help with testing Thunderbird firmware. If you wish, you can send the firmware and say what tests are required. After the flights, I have a report.

Today I tried to generate Missionfiles in different way.
Using DataPilotPlanner generate .plan file, import this in UAV Toolbox and export to CCC ST16S.
But same result. Drone decending vertical to GND and stop motors. CCC is still active. When restart motors and try to start the HPlus its try to move horizontally towards a waypoint standing on GND. Which means it tips over forward immediately and crashes on propps

Tuna, I have problem to start a mission created by UAV Toolbox v.3.2.2
No way to fly a mission, planned with UAV Toolbox with my HPlus.
The only thing happens after I gave command to start the mission (left hand stick up or down) is,
the decending of the HPlus vertically downwards to Ground and land.
I investigated the mission files structure, but cant see a command for this unlike behavior.

Guess I got banned already. Don’t know why. Least it lasted 1 day. Guess I will stick with RC forums. Is there some kind of “Click” on here
Now it’s back. Oh well. It was found with a line thru it before. That Is a mystery

Could anyone tell me how to update 520E please

George,
Would you please take a look at my post about my E90 camera?

Issues and differences with E90 and C23 cameras related to 5.8 GHz and downlink video and telemetry​

Thanks,
Stephen

Bonjour
je cherche une solution pour que les sticks de la st16 soit reconnu comme un joypad par android , avez vous une solution ?

Merci d'avance

Yuneec Typhoon H Pro 4k Intel RealSense Collision Avoidance Hexacopter GCO3 4K Camera Kit, Wizard Wand, Bag, Battery, Polaroid 32GB. Blinking green light 3 times per second. stating air craft in smart mode without GPS

I would like to know what everyone uses for video compression... i'd like to post some of my videos online.. you tube and instagram!

Thanks for letting me join - I don't even have a Yuneec yet, but that gets rectified on Tuesday when my new H Plus arrives. Can't wait.

Sooo excited - H Plus arrives on Tuesday. Wooohooo, can’t wait!

I can not copy and paste videos from the ST16S to an external drive on the ST16S.
I can copy and past Jpeg pictures just fine. Can videos be copied and pasted. This way?
Thx Terry

How do i get the maps working on my mantis Q hmm...

Hi Bobcatt,
Where did you send your Typhoon H?
Most of the Vendors and Repair Facilities have either gone out of Business or no longer Repair Yuneec Drones.
I have a feeling you sent your Typhoon H to KAV Service in Kansas City, Missouri if so your sadly out of luck and have no recourse, KAV closed their Doors in September of 2019.
Take Care

Tuna,
I have a large number of CCC files for the Typhoon H and would like to load them to use for my Typhoon H Plus in UAV Toolbox. Where do I place the CCC files in the android directory in order to make them accessible to UAV Toolbox. BTW, I have version 3.2.2 on my ST-16S.
Thanks,
Stephen

Bonjour,
Pourriez-vous m'aider ? en effet, j'ai un message d'erreur sur ma camera E90 je n'arrive pas a la connecter meme avec le code 1234567890. Je ne comprends pas comment réinitialiser.