Hy, I was wondering if there is a simple way, without charge-station, nor inserting into your drone, to know the status of the battery ? With DJI you can actually see status-leds. Can't find anything on my Yuneec's battery ...
Battery status
- Thread starter X-Fly
- Start date
Here's something that might do the job easily and quickly:
Battery Voltage Reader For Yuneec H520, Typhoon H, Typhoon H Plus, & Q500 Series | eBay
"The batteries for your Yuneec drones do not display their voltage level. With this device, you will be able to read the voltage of your drone batteries without having to turn on your aircraft or controller. This device simply plugs into your battery and reads the battery's current voltage level. This device is compatible with your Yuneec H520, Typhoon H, Typhoon H Plus, or Q500 series drone. "
I've never tried this particular unit but used to carry a similar one in my Flight Box for years for checking LiPo units on the flight line.
Battery Voltage Reader For Yuneec H520, Typhoon H, Typhoon H Plus, & Q500 Series | eBay
"The batteries for your Yuneec drones do not display their voltage level. With this device, you will be able to read the voltage of your drone batteries without having to turn on your aircraft or controller. This device simply plugs into your battery and reads the battery's current voltage level. This device is compatible with your Yuneec H520, Typhoon H, Typhoon H Plus, or Q500 series drone. "
I've never tried this particular unit but used to carry a similar one in my Flight Box for years for checking LiPo units on the flight line.
Correct. For a "quick reference" that's all I'm needing in the field. If I need to know more I have other means available
So 100% would be all cells full, and 50% could be all cells at 50, or as an example, 2 cells at 100 and 2 at zero
This is storage charge for the H Plus or the H520. Full charge is 4.35v per cell or 17.4 v total.
This is available on Amazon or eBay. https://smile.amazon.com/Favrison-B...battery+tester&qid=1548138601&sr=8-3-fkmrnull
This is available on Amazon or eBay. https://smile.amazon.com/Favrison-B...battery+tester&qid=1548138601&sr=8-3-fkmrnull
Yes but this one only gives the total voltage and not every cell.
This device gives the voltage of each cell, makes it possible to rebalance the cells between them and also to put the battery in conservation mode while rebalancing the cells.
This device gives the voltage of each cell, makes it possible to rebalance the cells between them and also to put the battery in conservation mode while rebalancing the cells.
arruntus
Premium Pilot
- Joined
- Aug 19, 2017
- Messages
- 1,851
- Reaction score
- 730
Well Arruntus, everything went well. They let me out a week before the end of the rehabilitation, that is to say ...
I look assiduously the post on the new firmware 1.5.10, but I'm still waiting before putting it. Anyway, it snows at home and I could not try it immediately.
It remains only to put the trajectories with curve on the H520 and we will have the essential.
Bye.
I look assiduously the post on the new firmware 1.5.10, but I'm still waiting before putting it. Anyway, it snows at home and I could not try it immediately.
It remains only to put the trajectories with curve on the H520 and we will have the essential.
Bye.
arruntus
Premium Pilot
- Joined
- Aug 19, 2017
- Messages
- 1,851
- Reaction score
- 730
I'm glad everything went well and you're here again to drive us crazy
I told you, by the time you get back recovered, the big update will be waiting for you. And so it has been
Phaedrus
Premium Pilot
Not exactly the same one, but this one (and clones) are what most folks use:
Tenergy 5-in-1 Intelligent Cell Meter (Capacity Checker, Battery Balancer, Battery Discharger, Internal Resistance Tester, ESC/Servo PPM Tester)
Tenergy 5-in-1 Intelligent Cell Meter (Capacity Checker, Battery Balancer, Battery Discharger, Internal Resistance Tester, ESC/Servo PPM Tester)
