Clips into H arm

[Peter b]

The clips that I am trying to put inside the arm have become a real head scratcher. I got one to slide in but haven't put the screw back in yet. The other 2 no luck. I have the 3 original clips and 3 new ones. The same problem. Now what?[emoji848]

 

[Murray Martz]

The clips that I am trying to put inside the arm have become a real head scratcher. I got one to slide in but haven't put the screw back in yet. The other 2 no luck. I have the 3 original clips and 3 new ones. The same problem. Now what?[emoji848]

Is the issue they won't slide into place? If so, flip them over.

 

[Yuneec Skins]

This might Help: Cause of Loose Motor Arms & Latch Replacement....

 

[Yuneec Skins]

You Can't Flip them over, If they are Bent you can straighten them, with a Pair of Needle Nose Pliers, & Regular Pliers

 

[Murray Martz]

You Can't Flip them over, If they are Bent you can straighten them, with a Pair of Needle Nose Pliers, & Regular Pliers

Apparently I should have been clearer. If they won't slide in it may be that you are trying to put them in flipped as they only fit one way.

 

[Steve Carr]

The clips that I am trying to put inside the arm have become a real head scratcher. I got one to slide in but haven't put the screw back in yet. The other 2 no luck. I have the 3 original clips and 3 new ones. The same problem. Now what?[emoji848]

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[Pöllö]

At least for me the new ones required some filing to fit in place. I am not sure if this is the case for you.

 

[Windcalmer]

No matter how hard I pushed on mine, they would not clip into place. I used a small flat head screwdriver and pressed the "clip" part into place and it worked like a charm. I can make a video if you need me to be clearer than that.