Hello Fellow Yuneec Pilot!
Join our free Yuneec community and remove this annoying banner!
Sign up

DIY LiHV Charge Cables

Joined
Nov 10, 2016
Messages
347
Reaction score
164
Age
70
Location
London, ON Canada
I had previously made a few LiHV charge cables by painstakingly casting the individual connectors in JB weld, then encasing them in a 3D printed housing of my own design. But I thought I could put my unused Yuneec LiHV charger boxes to better use as they don't have a "store" function and were just occupying space on a shelf, collecting dust, and offered to be "doners". What follows is how I "hacked" the connector out of 2 of the "doner" chargers and made 2 LiHV charger cables to be used with a good multi functional charger.
 

Attachments

davemh

Premium Pilot
Joined
Jun 6, 2018
Messages
134
Reaction score
79
Location
Central Florida, USA
i did the conversion as suggested by Steve Carr.
Worked out very well.
PLUS Charger II.jpg PLUS Charger.jpg
 
Joined
Nov 10, 2016
Messages
347
Reaction score
164
Age
70
Location
London, ON Canada
Yes, I thought about keeping the bulky charge box initially, but decided that I would never go back to using the charger in the original way with the slow power supply and lack of functions. So for that reason, I chose to make the less bulky charge cables, as I would always be using a high end multi-function charger. Your choice od course......
 

New Threads

Members online

Forum statistics

Threads
18,356
Messages
214,513
Members
21,290
Latest member
Ahmad Anas