- Joined
- Oct 14, 2019
- Messages
- 24
- Reaction score
- 7
- Age
- 34
Hello, has anyone had successful mapping results with the E90 camera? I have an H520G (which uses Yuneec ST10C controlled + iPad + SiteScan iOS app). This is a pain to use for manual camera settings as it won't let you change them while you're up in the air. Thus far I've just flown all missions on auto camera settings.
Today I decided to compare the output orthos of the H520G with those taken from a P4P. I did two exact flights using SiteScan iOS app, back to back, only that for the P4P I used manual settings: shutter priority, ISO 100, and Auto AWB. This was at 300ft altitude and 80% overlap, 80% sidelap.
The H520G pictures looked overexposed and almost soft / no good color. The resulting ortho was pretty terrible, the trees were more like blobs and you could not define the leafs very well. On the other hand, the P4P outputs were amazing. The images were crisp and colorful. The trees came out stitched almost perfectly. Are there any settings/workflow you follow for this? Any help would be extremely appreciated.
Today I decided to compare the output orthos of the H520G with those taken from a P4P. I did two exact flights using SiteScan iOS app, back to back, only that for the P4P I used manual settings: shutter priority, ISO 100, and Auto AWB. This was at 300ft altitude and 80% overlap, 80% sidelap.
The H520G pictures looked overexposed and almost soft / no good color. The resulting ortho was pretty terrible, the trees were more like blobs and you could not define the leafs very well. On the other hand, the P4P outputs were amazing. The images were crisp and colorful. The trees came out stitched almost perfectly. Are there any settings/workflow you follow for this? Any help would be extremely appreciated.