Hello Fellow Yuneec Pilot!
Join our free Yuneec community and remove this annoying banner!
Sign up

How to install simualtor to PC/St16?

Joined
Apr 6, 2016
Messages
901
Reaction score
247
Age
73
Hi, I just bought a USB simulator to use with my St16 and H. I have installed the program in my PC but how do I connect it to the ST16? Looked for a youtube but can't find it.. Any tips appreciated.
 
Open sim on pc and enter bind mode. Go on st16 into bind mode and hit refresh then select the dongle and bind. You might want to copy your typhoon profile and name it simulator so you can easily switch back and forth. Make sure turtle mode switch is all the way up/fast on st16. Have fun
 
Hi

The UAV Sim has now been upgraded to include the Typhoon H. It took me over 3 hours to get it working due to not being able to bind the sim with the ST16. I did look on the net and You Tube but could not find anything to help. I eventually went through every combination of key i/p’s and finally cracked it. To save others going through the same pain I did, I thought I would post some instructions


This works with UAV SIM V2.10 Dated 18 Oct 16 available on the UK Yuneec website


Enjoy


Setting up a SIM model on the ST16

If you have not already done it, set up a new model on the ST16

ST16 - Model Select -> OK

ST16 - New Model -> Create new model

Type in a name e.g. SIM àSelect model type “Typhoon H” - >Save


PC - Insert SIM UAV dongle

PC Start the UAV SIM

PC - Model -> Select->Typhoon H -> OK

PC – Radio-> Bind Yuneeec USB Receiver

PC Displays “Please set the Transmitter into bind mode then click OK”

DO NOT Click OK YET


ST16 - System Settings ->OK

You now need to find the receiver for the dongle

Go back to your PC


PC should still be displaying

“Please set the Transmitter into bind mode then click OK”

PC - Now you can Click OK

PC should now be displaying

”In the bind menu of the transmitter now select the USB receiver SRXXXX then click OK”

DO NOT Click OK



ST16 - Press Refresh

The dongle receiver name should now appear in the aircraft model window

e.g SR23s_12000.05


Follow these instructions EXACTLEY


ST 16 - Press the receiver name

ST16 -Press Bind, ST16 now displays “Connection established”

ST 16 - Press OK


PC Should be still be displaying ”In the bind menu of the transmitter now select the USB receiver SRXXXX then click OK

PC - Now you can select OK


PC Should now be displaying “In order to establish the connection, return to the transmitter main screen by pressing the transmitters back button twice”

DO NOT PRESS OK ON THE PC YET


ST16 - Select the back button

PC Should be still be displaying “In order to establish the connection, return to the transmitter main screen by pressing the transmitters back button twice”

PC - Now you can Press OK

You should now see

PC “The bind procedure has been completed successfully”

PC - Select OK


Tip 1 The Typhoon H will not take off unless the hare / tortoise switch is set to hare

Tip 2 If you get errors with binding, forget messing with the programme on your PC, it does not help, turn off / on the ST 16 and start again.
 
Hi

The UAV Sim has now been upgraded to include the Typhoon H. It took me over 3 hours to get it working due to not being able to bind the sim with the ST16. I did look on the net and You Tube but could not find anything to help. I eventually went through every combination of key i/p’s and finally cracked it. To save others going through the same pain I did, I thought I would post some instructions


This works with UAV SIM V2.10 Dated 18 Oct 16 available on the UK Yuneec website


Enjoy


Setting up a SIM model on the ST16

If you have not already done it, set up a new model on the ST16

ST16 - Model Select -> OK

ST16 - New Model -> Create new model

Type in a name e.g. SIM àSelect model type “Typhoon H” - >Save


PC - Insert SIM UAV dongle

PC Start the UAV SIM

PC - Model -> Select->Typhoon H -> OK

PC – Radio-> Bind Yuneeec USB Receiver

PC Displays “Please set the Transmitter into bind mode then click OK”

DO NOT Click OK YET


ST16 - System Settings ->OK

You now need to find the receiver for the dongle

Go back to your PC


PC should still be displaying

“Please set the Transmitter into bind mode then click OK”

PC - Now you can Click OK

PC should now be displaying

”In the bind menu of the transmitter now select the USB receiver SRXXXX then click OK”

DO NOT Click OK



ST16 - Press Refresh

The dongle receiver name should now appear in the aircraft model window

e.g SR23s_12000.05


Follow these instructions EXACTLEY


ST 16 - Press the receiver name

ST16 -Press Bind, ST16 now displays “Connection established”

ST 16 - Press OK


PC Should be still be displaying ”In the bind menu of the transmitter now select the USB receiver SRXXXX then click OK

PC - Now you can select OK


PC Should now be displaying “In order to establish the connection, return to the transmitter main screen by pressing the transmitters back button twice”

DO NOT PRESS OK ON THE PC YET


ST16 - Select the back button

PC Should be still be displaying “In order to establish the connection, return to the transmitter main screen by pressing the transmitters back button twice”

PC - Now you can Press OK

You should now see

PC “The bind procedure has been completed successfully”

PC - Select OK


Tip 1 The Typhoon H will not take off unless the hare / tortoise switch is set to hare

Tip 2 If you get errors with binding, forget messing with the programme on your PC, it does not help, turn off / on the ST 16 and start again.
Hi

The UAV Sim has now been upgraded to include the Typhoon H. It took me over 3 hours to get it working due to not being able to bind the sim with the ST16. I did look on the net and You Tube but could not find anything to help. I eventually went through every combination of key i/p’s and finally cracked it. To save others going through the same pain I did, I thought I would post some instructions


This works with UAV SIM V2.10 Dated 18 Oct 16 available on the UK Yuneec website


Enjoy


Setting up a SIM model on the ST16

If you have not already done it, set up a new model on the ST16

ST16 - Model Select -> OK

ST16 - New Model -> Create new model

Type in a name e.g. SIM àSelect model type “Typhoon H” - >Save


PC - Insert SIM UAV dongle

PC Start the UAV SIM

PC - Model -> Select->Typhoon H -> OK

PC – Radio-> Bind Yuneeec USB Receiver

PC Displays “Please set the Transmitter into bind mode then click OK”

DO NOT Click OK YET


ST16 - System Settings ->OK

You now need to find the receiver for the dongle

Go back to your PC


PC should still be displaying

“Please set the Transmitter into bind mode then click OK”

PC - Now you can Click OK

PC should now be displaying

”In the bind menu of the transmitter now select the USB receiver SRXXXX then click OK”

DO NOT Click OK



ST16 - Press Refresh

The dongle receiver name should now appear in the aircraft model window

e.g SR23s_12000.05


Follow these instructions EXACTLEY


ST 16 - Press the receiver name

ST16 -Press Bind, ST16 now displays “Connection established”

ST 16 - Press OK


PC Should be still be displaying ”In the bind menu of the transmitter now select the USB receiver SRXXXX then click OK

PC - Now you can select OK


PC Should now be displaying “In order to establish the connection, return to the transmitter main screen by pressing the transmitters back button twice”

DO NOT PRESS OK ON THE PC YET


ST16 - Select the back button

PC Should be still be displaying “In order to establish the connection, return to the transmitter main screen by pressing the transmitters back button twice”

PC - Now you can Press OK

You should now see

PC “The bind procedure has been completed successfully”

PC - Select OK


Tip 1 The Typhoon H will not take off unless the hare / tortoise switch is set to hare

Tip 2 If you get errors with binding, forget messing with the programme on your PC, it does not help, turn off / on the ST 16 and start again.
Great instructions: THANKS
 

New Posts

Members online

Forum statistics

Threads
20,955
Messages
241,599
Members
27,284
Latest member
csandoval