- Joined
- Nov 18, 2018
- Messages
- 54
- Reaction score
- 20
I have noticed a tilt in the Breeze photos from left to right, is there a way to calibrate the camera to eliminate this tilt?
Thankfully, I haven't notice it while recording video and I can easily correct it in post production. Still it would be nice to have a firmware update to fix it.
Thanks DM, I'll give it a try.Firmware won’t fix it on the Breeze. If you remove the bottom cover you will be able to see the white silicone dampeners that the camera and other electronics are suspended from. Check to see if the dampeners are equally suspending the electronics. If not you can try adjusting a bit to get rid of the tilt. They can also be purchased and replaced if deformed for some reason.
The level of the camera can be checked by placing on a table and rotating the pitch gimbal so the table edge is at the top or bottom of the camera’s FOV.
I can get rid of the tilt only by facing directly into or away from the wind, as the whole body and thus the camera have to lean for crosswind - and there's never less than a couple KPH wind here... which is a reason this place feels so great even in the summer, but not so great for using the air as a tripod![]()
We use essential cookies to make this site work, and optional cookies to enhance your experience.