Hello Fellow Yuneec Pilot!
Join our free Yuneec community and remove this annoying banner!
Sign up

Is there official support?

Joined
Dec 11, 2024
Messages
11
Reaction score
4
Age
25
Does the company still exist?
I tried mailing several yuneec-ish mails like:
info@yuneec.(ch,com)
[email protected] ...
Never got an answer - is there still any form of official support??
 
That is a good question! It seems that the consumer no longer has any way to contact Yuneec and must use the vendor they purchased their system from for support.

Possibly @joe@vertigodrones or @Enrico Jorysch could shed some light on this subject.
 
  • Like
Reactions: Peter b
Vendors do not use the same contacts as consumers and to my knowledge Yuneec no longer sells directly to consumers as they have done in the past.

Is there a particular issue you have that we might be able to help you resolve? Several of our members are very familiar with troubleshooting and repairing all but the newest Yuneec systems.
 
I'll try to shed some light on this... although... I have the impression that it's getting darker and darker :-(

ATL in Switzerland is the mother of Yuneec.
The owner lives in Switzerland herself and we have already met.
ATL in Switzerland has been closed, all employees have been made redundant.
I myself set up the service department and workshop for ATL in Zurich... in vain.

In Kaltenkirchen (Germany) all employees were also made redundant... we as dealers are also at a loss.

I try to help where I can in Switzerland... but at the moment I have no support from ATL or Yuneec.

I am still listed on the Yuneec Europe homepage for repairs and service... but I don't have the former service technicians as contacts for problems.

Is Yuneec withdrawing from Eurtopa? Is it setting up a new team in Europe?
I have no answers at the moment... sorry.

Best regards from Switzerland,
Enrico
 
The sales agent for Yuneec in the Netherlands told me that Yuneec was forced to stop their production China, they refused to implant prescribed government chipsets as extra on their circuit boards.
It sounded a bit wild to me but I couldn't debunk it either. (It is a fact that the use of DJI drones is not allowed near Dutch defense locations)
He claimed that Yuneec's German main engineer has started a drone company that builds drones for professional use only, mainly for surveillance and autonomous use.
I can still have my Typhoon H serviced at his workshop tough.
 
Addendum:

The e-mail address: [email protected] is still in use.
The mails come directly to me :-)
Bonjour Enrico,
J'ai essayé de contacter Yuneec en Allemagne par divers moyen.
C'est complètement impossible.
J'ai un problème sur la caméra Leica de mon H3.
Je vous ai envoyé un mail à ce sujet.
Je réside en France.
Merci

Hello Enrico,
I tried to contact Yuneec in Germany by various means.
It is completely impossible.
I have a problem with the Leica camera of my H3.
I sent you an email about it.
I live in France.
Thank you
 
Das habe ich auch schon festgestellt,das keine Antworten mehr auf EMails kommen,habe mich auch schon gefragt warum,wenn jedoch in Kaltenkirchen alle Mitarbeiter entlassen worden sein sollen,dann gibt es dort dann ja auch keine Werkstatt/Geschäft mehr.
Somit wäre jeder zukünftig auf sich alleine gestellt und muss sehen wie man zurecht kommt bei Problemen.
Wohnt jemand zufällig in der Nähe von Kaltenkirchen und kann mal vorbeischauen,ob es das Geschäft noch gibt? :)


I have already noticed that there are no more answers to e-mails, I have already asked myself why, but if all employees in Kaltenkirchen are supposed to have been fired, then there is no longer a workshop/shop there.

Thus, everyone would be on their own in the future and have to see how to cope with problems.

Does anyone happen to live near Kaltenkirchen and can stop by to see if the store still exists?
 
Last edited by a moderator:
I got a mail with the following signature - maybe it helps someone:
ATL - Advanced Technology Labs AG(Parent company of Yuneec Drone)
Add: Rütistrasse 18, 8952 Schlieren, Switzerland
E-Mail: [email protected]
WhatsApp:+86 18933991989

feel free to report back esp. regarding the Chinese WhatsApp :-D
 
  • Like
Reactions: WTFDproject
Bonjour Enrico,
J'ai essayé de contacter Yuneec en Allemagne par divers moyen.
C'est complètement impossible.
J'ai un problème sur la caméra Leica de mon H3.
Je vous ai envoyé un mail à ce sujet.
Je réside en France.
Merci

Hello Enrico,
I tried to contact Yuneec in Germany by various means.
It is completely impossible.
I have a problem with the Leica camera of my H3.
I sent you an email about it.
I live in France.
Thank you
Bonjour Monsieur DEFOSSE Jean-Claude

Tout d'abord, je dois vous informer que Yunnec en Allemagne et en Suisse, a suspendu le service pour une durée indéterminée.
Tous les employés ont été licenciés... triste, mais vrai !

Pourquoi le Mail Adreasse [email protected] n'a pas encore été désactivé est un mystère pour moi... a probablement été oublié.

Si quelqu'un était capable de réparer l'appareil photo LEICA ION c'est-à-dire de remplacer le processeur d'imagerie,
il n'y a que Leica qui puisse le faire. Il n'existe pas de pièces de rechange pour cette caméra sur le marché.

J'ai encore 2 nouveaux appareils dans mon assortiment (www.kopterbude.ch) et un Yuneec Typhoon H3 occasion.
Je n'ai pas de caméras individuelles.

Je suis désolé de ne pas pouvoir vous aider davantage.
Avec mes meilleures salutations de la Suisse,

Enrico Jorysch
 
Malheureusement, je n'ai pas de schéma technique ou de manuel de réparation pour la réparation de l'appareil photo Leica.

Je dois répondre à votre question de savoir si le H3 peut être utilisé avec un autre appareil photo sans non.

Il est possible d'accrocher un appareil photo C23 ou E90 en dessous et de recevoir une image sur le ST16S via WIFI, mais vous ne pouvez ni déplacer le cardan ni déclencher une photo ou une vidéo.

Vous auriez la possibilité de faire un H PLUS avec le H3, car la même technologie est installée... mais alors vous êtes lié à l'appareil photo C23, qui n'est pas aussi bon que le Leica et sinon vous n'auriez pas certaines possibilités et paramètres que vous avez avec le H3.
 
Well, they someday just answered unexpectedly to my mail regarding the missing camera model (Data Pilot Planner Windows: Missing Camera Model E20Tvx) and the windows version update.
Then another "technician" `@eu.yuneec.com` got involved and told me, after consulting "people responsible", that Yplanner would fix the issue. (hence What is yplanner and where to get it?)
But my questions as to what is that and where to get it have never been answered since then.
 
Malheureusement, je n'ai pas de schéma technique ou de manuel de réparation pour la réparation de l'appareil photo Leica.

Je dois répondre à votre question de savoir si le H3 peut être utilisé avec un autre appareil photo sans non.

Il est possible d'accrocher un appareil photo C23 ou E90 en dessous et de recevoir une image sur le ST16S via WIFI, mais vous ne pouvez ni déplacer le cardan ni déclencher une photo ou une vidéo.

Vous auriez la possibilité de faire un H PLUS avec le H3, car la même technologie est installée... mais alors vous êtes lié à l'appareil photo C23, qui n'est pas aussi bon que le Leica et sinon vous n'auriez pas certaines possibilités et paramètres que vous avez avec le H3.
Merci beaucoup pour les réponses à mes demandes. Je vais attendre le retour de la caméra, voir ce que je peux faire moi même ou alors il sera vendu pour pièces détachées. Cordialement
 
Bonjour Monsieur DEFOSSE Jean-Claude

Tout d'abord, je dois vous informer que Yunnec en Allemagne et en Suisse, a suspendu le service pour une durée indéterminée.
Tous les employés ont été licenciés... triste, mais vrai !

Pourquoi le Mail Adreasse [email protected] n'a pas encore été désactivé est un mystère pour moi... a probablement été oublié.

Si quelqu'un était capable de réparer l'appareil photo LEICA ION c'est-à-dire de remplacer le processeur d'imagerie,
il n'y a que Leica qui puisse le faire. Il n'existe pas de pièces de rechange pour cette caméra sur le marché.

J'ai encore 2 nouveaux appareils dans mon assortiment (www.kopterbude.ch) et un Yuneec Typhoon H3 occasion.
Je n'ai pas de caméras individuelles.

Je suis désolé de ne pas pouvoir vous aider davantage.
Avec mes meilleures salutations de la Suisse,

Enrico Jorysch
J'ai eu une réponse par mail de la part de Leica en Allemagne, étant donné que c'était une coopération avec Yuneec,
Il n'était pas possible pour eux d'intervenir sur la Leica, et il fallait que je me rapproche de chez Yuneec sur leur recommandation.
Comme il est impossible de rentrer en contact avec Yunnec en Allemagne c'est peine perdu pour la réparation.
J'ai juste perdu pour l'instant un peu plus de 3000€ et pour Yuneec ce n'est pas leurs problèmes.
C'est déplorable de voir ça et triste pour ceux qui ont acheter du matériel Yuneec comme moi.
MERCI YUNEEC

I got an email response from Leica in Germany, since it was a cooperation with Yuneec,
It was not possible for them to intervene on the Leica, and I had to contact Yuneec on their recommendation.
As it is impossible to get in touch with Yunnec in Germany it is a waste of time for the repair.
I have just lost for the moment a little more than 3000€ and for Yuneec it is not their problem.
It is deplorable to see this and sad for those who bought Yuneec equipment like me.
THANK YOU YUNEEC
 
I got a mail with the following signature - maybe it helps someone:


feel free to report back esp. regarding the Chinese WhatsApp :-D
Je viens d'envoyer un mail, je verrai bien si mail actif et si réponse de leur part. Merci

I just sent an email, I will see if the email is active and if they respond. Thank you
 
  • Like
Reactions: Pier2162
I received this email from Yuneec on December 3rd, 2024, so one could assume that the store in Kaltenkirchen could still exist.
Thank you for your continued support and trust in the Yuneec brand.

In order to further strengthen the integrated management of the group's brands and improve overall service efficiency, we have decided to optimize the sales model in Europe.

From December 9, 2024, our sales in Europe will be conducted in the name of our parent company Advanced Technology Labs AG (ATL AG), and all invoices will be changed from Yuneec Europe GmbH to Advanced Technology Labs AG (ATL AG).

The specific changes are as follows:

1. New orders From December 9, 2024, all new orders will be invoiced in the name of ATL AG. Payments must be remitted directly to ATL AG's Swiss account, and the specific payment information will be detailed in each invoice.

2. Existing orders and outstanding payments all invoices and outstanding payments issued by Yuneec Europe GmbH must still be paid to Yuneec Europe GmbH's account until they are fully settled.

Our commitment please rest assured that despite the change in the collection account, our service content in Germany will remain unchanged. This change is intended to further improve our overall efficiency and will not affect your long-term relationship with us.

You can still purchase our products through Yuneec channels, and if you have any after-sales questions, you can continue to contact our office in Germany. If you have any questions or need further explanation, please feel free to contact us, our team will serve you wholeheartedly.
 

New Posts

Members online

Forum statistics

Threads
21,343
Messages
245,852
Members
28,292
Latest member
steveakabambam