Is this a H920 or H920+ version of the CGO4?

[mouks]

Hi, can anyone tell if this CGO4 is for the H920 or H920+ from these pics? Thanks

 

[Wallaby]

Hi, it seems to be a CGO4 for a H920+ version.

 

[HawkeyePoole]

That looks like my H920+ model but I don't know if the two models are physically different.

 

[mouks]

Thanks, I have the H920. While looking at pictures and videos of both the H920 and H920+, I didn't spot any difference either. However, I decided to buy it as it was only $300 for the set. I'm going to pick it up on Thursday. Worst case scenario, I will only use it on the grip.

 

[Wallaby]

Worst case scenario, I will only use it on the grip.

Mouks, please note there is no micophone installed. I modified my CGO4 cam with an external Blu Tooth microphone. The result is a perfect sound without any gimbal sounds.
But you have to open the case and assemble a connection socket to the jack inside, if you need recorded sound too.
If you need additional info, please let me know.

 

[Vaklin]

I need. Thank you!

 

[mouks]

Mouks, please note there is no micophone installed. I modified my CGO4 cam with an external Blu Tooth microphone. The result is a perfect sound without any gimbal sounds.
But you have to open the case and assemble a connection socket to the jack inside, if you need recorded sound too.
If you need additional info, please let me know.

Thanks, I didn't really think about audio, did you take some pics of your mod?

 

[Wallaby]

I'm sorry I did no take pics from inside the cam, because it's a really simple mod: only 4 screws, a small cable with a stereo microhone jack and plug, connected to the jack inside. That's all (see attached pic, I marked the new stereo jack)
Before I installed an old cam microphone inside the CGO4 (have a look at the pic: the microphone is behind the small holes). But it's not really reasonable, to much noise from the gimbal.
But with the external microphone it's practical. I used the TREIDEK system, cheap with a good result.