So, picked up a second breeze on ebay, did a really foolish thing, diskpart clean, format, now it won’t give me a wifi to connect to. Reset won’t work, can’t see it from a pc anymore! Does anyone know if there is a jtag interface to reflash it? Or any service center to send the mainboard to?
Major mistake! Help
- Thread starter Ldhn1uec
- Start date
The A9 board has been bricked. There is a warning in our sticky threads about this. Unfortunately many do not see it until it is too late.
Here are photos of the board, but I see no evidence of a jtag interface on the board. FCA Flying Camera with 5.8G WIFI Teardown Internal Photos Internal Photo Yuneec Technology.
You can try keeping an eye on eBay for a replacement A9 board.
Warning to Breeze owners! Only format the internal Breeze memory from the BreezeCam app. Formatting from a PC while connected via USB cable will brick the board that has the memory, WiFi and USB interfaces.
Here are photos of the board, but I see no evidence of a jtag interface on the board. FCA Flying Camera with 5.8G WIFI Teardown Internal Photos Internal Photo Yuneec Technology.
You can try keeping an eye on eBay for a replacement A9 board.
Warning to Breeze owners! Only format the internal Breeze memory from the BreezeCam app. Formatting from a PC while connected via USB cable will brick the board that has the memory, WiFi and USB interfaces.
that was my fear! oh well, bought it for mechanical parts anyway. can i swap my a9 board into this unit to test?
Similar threads
