- Joined
- Feb 16, 2021
- Messages
- 15
- Reaction score
- 1
- Age
- 75
Hi, I am new here, and with a new H plus with one flight on it, I was reading on the forum about Qground control to get log files etc. I plugged the H plus into the computer with USB. No battery installed and it connected fine so I messed with Qground a bit, unhooked everything, The next day I got out the drone, upon turning everything on, no lights on at all on the arms, no camera control, it was working, just no control. I came back to the forum to check the problem out, I read all I could find about this issue, tried all the fixes I could find, reinstalled the firmware, I upgraded to build 822 on both the drone and ST16s using files I got here from the repository of files, no luck still wont start up. I even took the top off to see about the 6 blue leds, all were lit and the orange one too. The fan running. I went step by step with the wtfd project to reinstall the firmware, still the same. The only change from flying and working perfectly, and being a brick is Qground. What a frustrating thing, I thought this was going to be fun. At least I am learning alot. Any help and advise would be appreciated.
thank you Andrew
thank you Andrew