I'm looking for a calibration menu password for ST24.
12345678, 1234567890, and so on don't work.
12345678, 1234567890, and so on don't work.
Last edited:
ST24 calibration password?
- Thread starter Vaklin
- Start date
Is that for an ST16S? To my knowledge the ST16 for the H480 does not have a password to access any calibration menu.
ST24 is an old device, dedicated to 920. Mistyped in the body of the message. Now is the right one. ST24.
To explain for what I want to have this password. Probably it's not necessary to me.
I bought a second-hand ST24 controller. The target is to see how the RC part of the software is organized, is possible to bind it with an H480, and so on. To start from a fresh device I'd like to do a firmware reset. Now device looks to be calibrated well, but I'm not sure will stay the same after the planned manipulation. So, for insurance, is better to have this password.
If someone did this reset, let share his emotions with us.
I bought a second-hand ST24 controller. The target is to see how the RC part of the software is organized, is possible to bind it with an H480, and so on. To start from a fresh device I'd like to do a firmware reset. Now device looks to be calibrated well, but I'm not sure will stay the same after the planned manipulation. So, for insurance, is better to have this password.
If someone did this reset, let share his emotions with us.
You might want to try this password:
It is required when updating from a very old operating system to a newer one. If I remember correctly it was needed for accessing the test mode on the ST24. Maybe you are lucky and it is the same you need.
Hello Vaklin
I can help you, but unfortunately only on Monday evening.
I know this password... but I don't remember it anymore... I must first look in my documents, which I do not have at home.
I ask for a little patience... I will post the password here.
Best regards,
Enrico
I can help you, but unfortunately only on Monday evening.
I know this password... but I don't remember it anymore... I must first look in my documents, which I do not have at home.
I ask for a little patience... I will post the password here.
Best regards,
Enrico
*#*#3698741#*#*
I can’t see how to attach a video so I uploaded it here.. it’s in Chinese but you get the idea.
It will expire in 39 days or something so if someone knows how to save the file to this server so it stays here please do so.
I can’t see how to attach a video so I uploaded it here.. it’s in Chinese but you get the idea.
It will expire in 39 days or something so if someone knows how to save the file to this server so it stays here please do so.
Last edited by a moderator:
Code is not patch!
Sorry, I'll try as in the video is showed. I tried by calibration page.
Last edited:
Should there be German speaking H920 pilots here, the whole thing still in German.
Google Translate:
Yuneec Ground Station ST-24 Passwords
Password for calibration of the ST - 24
Step 1: Go to Pad Mode (tablet)
Step 2: Press Settings
Step 3: Scroll down the left field to About Device.
Step 4: Press About Device
Step 5: Scroll down the right field to Enter Test.
Step 6: Press Enter Test
Step 7: Enter password: *#*#3698741#*#*
Step 8: Confirm and you're done.
Binding password to bind the copter to the St - 24 Password: 1234567890
Google Translate:
Yuneec Ground Station ST-24 Passwords
Password for calibration of the ST - 24
Step 1: Go to Pad Mode (tablet)
Step 2: Press Settings
Step 3: Scroll down the left field to About Device.
Step 4: Press About Device
Step 5: Scroll down the right field to Enter Test.
Step 6: Press Enter Test
Step 7: Enter password: *#*#3698741#*#*
Step 8: Confirm and you're done.
Binding password to bind the copter to the St - 24 Password: 1234567890
Attachments
Last edited by a moderator:
I think Google Translate did an okay job this time.
A big thank you to both @Haydn and @Enrico Jorysch for providing this undocumented information. At least undocumented in the User Manual for the ST24.
A big thank you to both @Haydn and @Enrico Jorysch for providing this undocumented information. At least undocumented in the User Manual for the ST24.
Last edited:
