To explain for what I want to have this password. Probably it's not necessary to me.
I bought a second-hand ST24 controller. The target is to see how the RC part of the software is organized, is possible to bind it with an H480, and so on. To start from a fresh device I'd like to do a firmware reset. Now device looks to be calibrated well, but I'm not sure will stay the same after the planned manipulation. So, for insurance, is better to have this password.
If someone did this reset, let share his emotions with us.
It is required when updating from a very old operating system to a newer one. If I remember correctly it was needed for accessing the test mode on the ST24. Maybe you are lucky and it is the same you need.
I can’t see how to attach a video so I uploaded it here.. it’s in Chinese but you get the idea.
It will expire in 39 days or something so if someone knows how to save the file to this server so it stays here please do so.
Should there be German speaking H920 pilots here, the whole thing still in German.
Yuneec Ground Station ST-24 Passwords
Password for calibration of the ST - 24
Step 1: Go to Pad Mode (tablet)
Step 2: Press Settings
Step 3: Scroll down the left field to About Device.
Step 4: Press About Device
Step 5: Scroll down the right field to Enter Test.
Step 6: Press Enter Test
Step 7: Enter password: *#*#3698741#*#*
Step 8: Confirm and you're done.
Binding password to bind the copter to the St - 24 Password: 1234567890