Using the H480 charger to charge dji Mini 3 Pro batteries question (also posted in the Mini 3 forum)

[FlushVision]

I was wondering if I could use the H480 charging outlet that charges the ST16 controller to charge my Mini 3 Pro batteries. I've looked at the manual for this charger but it doesn't specify the output to the USB C and I know that the maximum charge rate of the Mini 3 Pro batteries is 30 W.
Currently I'm using a 'phone charger but it's taking roughly two hours to charge a battery and I want to cut this charging time down. Please help!

I hope I'm making some sense

 

[DoomMeister]

The USB-A output from the charger is 5V 2A so a 10W charger.

A USB-C charger will work best.

 

[FlushVision]

The USB-A output from the charger is 5V 2A so a 10W charger.

A USB-C charger will work best.

then it'll seem that it will be slower that my 'phone charger that I'm currently using. It was just a thought at the end of the day. Thanks Doom.

 

[DoomMeister]

then it'll seem that it will be slower that my 'phone charger that I'm currently using. It was just a thought at the end of the day. Thanks Doom.

Be sure to read my response in the MP forum. USB-C charging blocks are fairly inexpensive and others in MP suggest using a 30 W charger.

 

[FlushVision]

Be sure to read my response in the MP forum. USB-C charging blocks are fairly inexpensive and others in MP suggest using a 30 W charger.

I've seen it. Thanks Doom.