Hello Fellow Yuneec Pilot!
Join our free Yuneec community and remove this annoying banner!
Sign up

Yuneec Accellerometer Confirmation!!!!!

Joined
Mar 2, 2016
Messages
0
Reaction score
13
Location
Texas
Just off the phone with Yuneec technical engineer, not CS. The last Yhypoon H Manual has been removed from the website and updated/corrected !!! When doing the ACC Calibration, do it on flat/level surface! Do Not Hover to Complete Calibration !!!. After your calibration on the level surface the light indicator will flash normal if SUCCESSFUL after rebooting up to it's normal color configuration of Green=Smart Mode and Purple= Angle Mode.
Also see reply by Tim-Yuneec USA attached.

Perform on a flat level surface per manual v1.1.

[email protected]
NewWaiting to hear back from PM's. Not sure where that v1.3 manual leaked out from.

[email protected]
M-F 6am-5pm PST
Sat. 8am-4:30pm PST

Website: http://www.yuneec.com
M-F 6am-5pm PST
Sat. 8am-4:30pm PST

Website: http://www.yuneec.com
Yuneec_Usa, 40 minutes ago

 
In the older manual I always wondered why it said calibrate on a level surface but it can't be windy. :confused:
Yuneec you got nothin on DJI. :D
 
Just off the phone with Yuneec technical engineer, not CS. The last Yhypoon H Manual has been removed from the website and updated/corrected !!! When doing the ACC Calibration, do it on flat/level surface! Do Not Hover to Complete Calibration !!!. After your calibration on the level surface the light indicator will flash normal if SUCCESSFUL after rebooting up to it's normal color configuration of Green=Smart Mode and Purple= Angle Mode.
Also see reply by Tim-Yuneec USA attached.

Perform on a flat level surface per manual v1.1.

[email protected]
NewWaiting to hear back from PM's. Not sure where that v1.3 manual leaked out from.

[email protected]
M-F 6am-5pm PST
Sat. 8am-4:30pm PST

Website: http://www.yuneec.com
M-F 6am-5pm PST
Sat. 8am-4:30pm PST

Website: http://www.yuneec.com
Yuneec_Usa, 40 minutes ago
Thanks D.C. Hope this puts all the whining to rest!
 
Just off the phone with Yuneec technical engineer, not CS. The last Yhypoon H Manual has been removed from the website and updated/corrected !!! When doing the ACC Calibration, do it on flat/level surface! Do Not Hover to Complete Calibration !!!. After your calibration on the level surface the light indicator will flash normal if SUCCESSFUL after rebooting up to it's normal color configuration of Green=Smart Mode and Purple= Angle Mode.
Also see reply by Tim-Yuneec USA attached.

Perform on a flat level surface per manual v1.1.

[email protected]
NewWaiting to hear back from PM's. Not sure where that v1.3 manual leaked out from.

[email protected]
M-F 6am-5pm PST
Sat. 8am-4:30pm PST

Website: http://www.yuneec.com
M-F 6am-5pm PST
Sat. 8am-4:30pm PST

Website: http://www.yuneec.com
Yuneec_Usa, 40 minutes ago
Hi thank you very much
 

New Posts

Members online

Forum statistics

Threads
20,955
Messages
241,587
Members
27,284
Latest member
csandoval