Yuneec Accellerometer Confirmation!!!!!

[DroneClone]

Just off the phone with Yuneec technical engineer, not CS. The last Yhypoon H Manual has been removed from the website and updated/corrected !!! When doing the ACC Calibration, do it on flat/level surface! Do Not Hover to Complete Calibration !!!. After your calibration on the level surface the light indicator will flash normal if SUCCESSFUL after rebooting up to it's normal color configuration of Green=Smart Mode and Purple= Angle Mode.
Also see reply by Tim-Yuneec USA attached.

Perform on a flat level surface per manual v1.1.

uscs@yuneec.com
NewWaiting to hear back from PM's. Not sure where that v1.3 manual leaked out from.

uscs@yuneec.com
M-F 6am-5pm PST
Sat. 8am-4:30pm PST

Website: http://www.yuneec.com
M-F 6am-5pm PST
Sat. 8am-4:30pm PST

Website: http://www.yuneec.com
Yuneec_Usa, 40 minutes ago

 

[apexi]

Thanks for clearing up the confusion!

 

[Mojoe35]

Good thing I asked the question about the Acc calibration! I guess I'll tear up my copy of the 1.3 manual!

Mojoe35

 

[Dragonflyerthom]

I never was confused. I was and am in the dark,lol.

 

[Jimmylee]

In the older manual I always wondered why it said calibrate on a level surface but it can't be windy.
Yuneec you got nothin on DJI.

 

[humboldt 707]

Just off the phone with Yuneec technical engineer, not CS. The last Yhypoon H Manual has been removed from the website and updated/corrected !!! When doing the ACC Calibration, do it on flat/level surface! Do Not Hover to Complete Calibration !!!. After your calibration on the level surface the light indicator will flash normal if SUCCESSFUL after rebooting up to it's normal color configuration of Green=Smart Mode and Purple= Angle Mode.
Also see reply by Tim-Yuneec USA attached.

Perform on a flat level surface per manual v1.1.

uscs@yuneec.com
NewWaiting to hear back from PM's. Not sure where that v1.3 manual leaked out from.

uscs@yuneec.com
M-F 6am-5pm PST
Sat. 8am-4:30pm PST

Website: http://www.yuneec.com
M-F 6am-5pm PST
Sat. 8am-4:30pm PST

Website: http://www.yuneec.com
Yuneec_Usa, 40 minutes ago

Thanks D.C. Hope this puts all the whining to rest!

 

[DroneClone]

Thanks for clearing up the confusion!

I wish all confusion was cleared up so easily ! LOL !

 

[DroneClone]

In the older manual I always wondered why it said calibrate on a level surface but it can't be windy.
Yuneec you got nothin on DJI.

Low Blow!

 

[DroneClone]

Thanks D.C. Hope this puts all the whining to rest!

Amen!

 

[BobW55]

Thank you
For NOT calling it a compass!

 

[DroneClone]

Thank you
For NOT calling it a compass!

LOL ! I gave up on the "C" word a few days ago !LOL ! I see you have a side kick !

 

[BobW55]

I have 5 side kicks......and they are all 4 legged...LOL

 

[DroneClone]

I have 5 side kicks......and they are all 4 legged...LOL

Let me guess, three dogs and two cats? LOL ! okay, how bout 4 dogs !

 

[BobW55]

3 cats all but found us, 2 dogs.
Who knows what else may be running around here.

 

[DroneClone]

3 cats all but found us, 2 dogs.
Who knows what else may be running around here.

Close! Just had it reversed ! LOL !

 

[jngrally]

Do you guys do a comedy routine?!?

 

[DroneClone]

Do you guys do a comedy routine?!?

Education and comedy both !

 

[Goh]

Just off the phone with Yuneec technical engineer, not CS. The last Yhypoon H Manual has been removed from the website and updated/corrected !!! When doing the ACC Calibration, do it on flat/level surface! Do Not Hover to Complete Calibration !!!. After your calibration on the level surface the light indicator will flash normal if SUCCESSFUL after rebooting up to it's normal color configuration of Green=Smart Mode and Purple= Angle Mode.
Also see reply by Tim-Yuneec USA attached.

Perform on a flat level surface per manual v1.1.

uscs@yuneec.com
NewWaiting to hear back from PM's. Not sure where that v1.3 manual leaked out from.

uscs@yuneec.com
M-F 6am-5pm PST
Sat. 8am-4:30pm PST

Website: http://www.yuneec.com
M-F 6am-5pm PST
Sat. 8am-4:30pm PST

Website: http://www.yuneec.com
Yuneec_Usa, 40 minutes ago

Hi thank you very much

 

[PatR]

What confusion? I was never confused

 

[griz11]

I never was confused. I was and am in the dark,lol.

Me too