- Joined
- Dec 18, 2016
- Messages
- 14
- Reaction score
- 1
- Age
- 57
I used this version of the GUI left everything else alone powered up my hex, then plugged in my usb lead, in came up with com port5 i clicked the first tab to comfirm com port 5 to make sure it was working i tested all motors to work and they did, i then went into the settings to change the geo fence from 91m to 175m then changed the altitude from 122m to 183m then click each update then exit the gui programme, unplug the usb then plugged it back in then go to the GUI icon to see if my geo and altitude stayed at what i set them to and HEY PRESTO THEY DID, done test to see if it went over 400ft guess what it sure did go over 400ft so very happy in finding out a very very simple solution
http://www.yuneec.com/en_US/support/downloads.html
http://www.yuneec.com/en_US/support/downloads.html
Last edited: