Hello Fellow Yuneec Pilot!
Join our free Yuneec community and remove this annoying banner!
Sign up

help

  1. C

    Breeze 4K and controller having connections issues

    I first got the drone in April. For a month or so, everything was great and working as it should. Until one day, I'm flying the Breeze about 80 meters in the air and it loses signal. Typically this isn't an issue since it will usually return home upon losing signal, but my battery is running...
  2. S

    Help how bad is it? USB plugged into phone charger

    i have just bought a brand new breeze and had it on my table with my son I told him we just need to charge it up and we get to fly I had left for 2 Mins to get the charger when I returned my so had plugged the USB port on the drone into the phone charger I immediately pulled it out not knowing...
  3. M

    GPS calibration says 'lower than 20% power" although drone is 95% charged?

    Having huge issues here, stressing me out! I can't even get the drone off the ground because i can't calibrate it. it's fully charged, but i click 'start' on the calibration page and it won't do it because less than 20% power which doesn't make any sense. what am i doing wrong here?
  4. P

    Need help finding a CGO2+ Camera Housing

    HELLO! I cannot for the life of me find the housing for the CGO2+. I found plenty for the CGO3 - are they possibly compatible? Looked on carolinadronz, vertigo drones, and my local hobby shops. Any help is appreciated. Thanks, Pig
  5. N

    Yuneec controller

    Does anyone know what source code is used in the controllers or is an appilication that allows you to customs each function of the buttons on the controller. I would love to use the triggers as the throttle, left analog stick to controller the gimbal, and the top bumpers for yawn like Grand...
  6. B

    Q500 4k - 1080p/120?

    Hi all. I'm a "newer" drone user and have a DJI Mavic Pro, Q500 4k, and a Yuneec Breeze 4k. Anyway, while practicing with my q500, I noticed that my 1080p footage wasn't at 120fps, but rather 112.08 fps. I've looked just about everywhere I can to find a solution to this. Is this just the frame...
  7. B

    Does this work with Blade Chroma?

    I have a Blade Chroma with ST10, I was wondering if this camera would work with it. YUNEEC YUNCG03US 4K 3-Axis Gimbal Camera, Typhoon G & Q500 4K Quadcopter | eBay
  8. B

    Blade Chroma help

    I am not sure if this is the correct forum to be posting this on because I am new, but I'll give it a shot. About a week ago I got a Blade Chroma from a local hobby shop because the owner of it got tired of it flying away from him and crashing. Now I am in the process of getting it to work...
  9. S

    Technical specifications Yuneec H Pro

    I have the Yuneec H Pro but I need all the technical specifications from this device, can anybody help me with this, because on the website there is not much to find. I want to registre as a professionel pilot and I think I need more than the technical specifications I find on the website of Yuneec.
  10. DmitriyA

    help mih

    I need the electric schematic diagram tuphon H , help!!!
  11. T

    Camera Connection Failed after filming.

    Hello. i have since 2 days my own Tyhpoon H Professional (with Intel) drone, but when i fly with the drone and filming somethings and stop filming the camera disconnect with the st16 controller, with the popup: RC connecting.... WIFI connecting.... The drone goes to...
  12. D

    Not able to select RAW photos or new photo features (burst, timelapse, etc.)

    Hello All, I am a new owner and am enjoying the H so far. I have updated the firmware to match all the current versions on the website, but my available photo formats and photo modes are stuck at JPG and Single, respectively. There is no option to select others. Any help????? Thanks, Daren
  13. Q

    Typhoon H Timelapse Problem.

    Hello, I am new here and I have a question about the timelapse of the typhoon H. I was taking a timelapse of a house with the Point Of Interest. I let it take pictures for about 90 seconds but it only took 6 images, and the last image was crashed, split in half with green or grey background. I...
  14. D

    PLEASE HELP .. In Australia

    My near new , and 2nd Yuneec Q500 4K just fell out of the sky ( first one was my fault ) But this time it just flashed like crazy for a second or 2 and then went dark and fell only to light up not far from ground and smashed ... in Australia , who do I call in OZ , can anyone here help me ...
  15. C

    How do I replace landing gear motor?

    I recently crashed my Typhoon H into a tree, which caused some propellers to break, and a hard landing followed, resulting in a broken landing gear motor. I have purchased the replacement part, but after awhile of unsuccessfully trying to unscrew it, I have zero idea what I'm doing, and don't...
  16. J

    HELP ME PLEASE!!

    I was putting my Typhoon H in its box after fly when I saw this (See the loose cable in the picture). Should I worry about it? I made some tests and everyting was good, camera, landing gear, gimball and flying ok, but I still afraid about that. Please help me!!
  17. D

    Typhoon H control issue

    Hello and Merry Christmas Everyone. My H has a real control issue on the right hand stick. Regardless of the position of the rabbit/ turtle slider, the model moves in a jumpy increment of about 3 ft. and will continue that until the stick neutralizes. It is like a very flat expo curve at neutral...
  18. T

    Cruise Control Question...

    Hey folks...Happy Holidays To Everyone! I recently upgraded the firmware to the latest (had not done it since September), so I'm just wrapping my head around the new features. My question is on the Cruise Control using the D-Pad. Is it just me, or does the H only change direction when you...
  19. S

    Unsure when to charge // voltage fluctuating

    Hey gang, I'm out flying again for the first time in a while. Stock battery, full charge. I fell like it drained awfully quick... I was down to 14.7 in a matter of like 2 minutes. Probably 50-80ft up there, no crazy wind. I did tinker around like 10 minutes on the pad with some camera settings...
  20. John K. Fitzgerald

    Thanks to all forum members!!!!!

    Just a quick note to say thanks to all the members of this forum! For me this forum has been an excellent source of information and ideas. And since Yuneec's owners manuals are "vague" at best, this forum has been excellent tool for us to learn the finer points of our machines. Thanks again to...