repair

Hey fellow pilots! I have a slight issue on my hands. I was flying in a zone with many geometric obstacles. Despite the drone not starting and blaring alarms left right and center, I turned off the gps and took off. I turned around to show my friends and poof the drone drifted into a near by...

This is the first version of this guide. The work on the Breeze itself is a breeze for me, but fighting the publishing software is a real challenge for me. Now I know why I'm a technician instead of a clerical worker. This is in PDF format so it should open on anything that uses a PDF reader...

Good Afternoon Everyone, New member here just wanting to ask a few questions around drone repairs. I am looking to set up a drone repair business in Sheffield UK, I will be going online though so that people will be able to send their drones from all over the UK. What is the current situation...

Hey, I see a few posts on fly aways and I wanted to post this. I was flying in a corridor with trees to the left and the right. (realsense set to on and I was in manual mode) I flew the typhoon out to just over 100 feet away and turned the typhoon around to fly back to me. The typhoon became...

The reason I ask, there's a Repair Center Locator on the Yuneec USA site so I thought I'd test it. My only hits were 3 Best Buys, one of which isn't even a Best Buy. Maybe a Best Buy licensed mail order store front at best. I guess I was hoping for a real licensed repair center, not a Best Buy.

On the gimbal suspension Yuneec Typhoon H480 power supply was gone, it stopped working, the information on the firmware disappeared on the console. Since the guarantee was long over, before I sent it for repair to the workshop, I decided to look at myself how seriously everything is possible and...

My Breeze is damaged and I need to send it in for repairs. I have tried calling but am put on a 2-3 hour wait that never seems to end. I have tried emailing Yuneec with no response. Does anyone have experience with Yuneec repairs? If so, do I just mail it in? Hope for the best? This is...

Have had my Typhoon H for almost a year....shy of 3 days, purchased 6-9-16 and on this past Tuesday, 6-6-17, second flight of evening and the drone is about 270' alt, approximately 240" from myself/controller and it just takes an immediate descend to ground ---crash! Totally messed all props...

Still learning how to fly and crashed my Typhoon H today. The camera separated from the drone but the part of the gimbal that clips into the drone and attaches to the rails stayed connected to the body of the drone. This caused the wires to stay connected to the circuit board in the rail...

If so, get in touch; I have the ST16 you returned. I'd like to compare notes on what you sent it in for, and find out if Yuneec just pulled yours out of the bin and replaced mine with it. While I've been happy with the aircraft (T-H) and my communications with Yuneec, a recent warranty issue...

I broke and have ordered a Typhoon H Retract Module for my drone. I cannot find remove and replace instructions. Can anyone help?

I'm getting ready for a big flight tomorrow and am checking over my TH ahead of time. I set the bird on a level counter and noticed that the camera was drooping a little to one side. I started to inspect the CGO3 mount and dampeners and it appears there is a part or two missing - maybe...

Good morning all. Hope everyone had a great Xmas!! Mine has turned out to be a little bitter sweet. Started off great. Opened up my new Typhoon H drone on Christmas eve. Super excited. I am new to the drone world. Read through all the documentation that night. Made sure batteries were all...

my first time fly Breeze in outdoor. when I take off then start to drifting off after hit the fence. the one motor broke and come out. propellers and body also damage. so I send to Hong Kong Yuneec HK service center for repair. about one week I receive my Breeze. they replacement the motor...

I have a Phantom 4 and a Typhoon H Pro. I love both. I have received superb customer service from Yuneec. Way beyond my expectations. I do not like the fact that the H climbs to 10 meters when you switch out of Angle mode. I usually fly at low altitudes. This resulted in my H climbing into an...

New Parts/Accessories Tool for removing lampshade from Typhoon H motor LED Lampshade - In Stock Yuneec Typhoon H Motor Lampshade Puller Tool Typhoon H Blade Guards - In Stock Yuneec Typhoon H Propeller Protectors - Blade Guards Typhoon H RealSense Bolt-On Module - Shipping October 28th...

Hello everyone! i'm new to the forum and new to drone flying. I'm posting here in the hope that my story is not a unique one. The short version of my story is that my new Typhoon H crash landed itself my very first time using it. I don't know what happened, and that's where I'm hoping...