2 controllers 1 drone

[Bingger]

We have both st16 controllers binded to one drone and it shows the camera on both but only one controller runs it. How do run camera from one and flight from the other

 

[Shadowolf]

We have both st16 controllers binded to one drone and it shows the camera on both but only one controller runs it. How do run camera from one and flight from the other

Bind to one controller the one going to control the camera.
Then go into the menu and select team mode.
Then bind the 2nd controler.

 

[CraigCam]

It’s called team mode and it can be confusing first time. Bottom line is your main ST becomes camera control and the second controller becomes pilot with camera view. Both controllers can start/stop record or take pictures. You can make the joy sticks run tilt and pan by flipping the tilt mode switch down to position 3 or get the right stick for pan and left slider for tilt in position 2 (many people think that position does nothing but here it does) which I’ve found is better for some operators.

I had to read the instructions several times as the translation is lacking and it took a few tries indoors to figure out so I was capable in the field.

 

[Steve Carr]

We have both st16 controllers binded to one drone and it shows the camera on both but only one controller runs it. How do run camera from one and flight from the other

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies