Blade Chroma, need Manuals, Binding

[tunneyinspectionservices]

Sorry, didn't realize I had tagged along in someone else’s thread. Chalk it up to me being a novice, and a newbie! You guys rock! We will talk again soon…hopefully.

 

[WTFDproject]

Can I get a whoop whoop! I have made mucho progress in the binding process this evening! Got all the way to number 39! Then the camera would not bind. The model # showed under “Model”. The GPS blue light is now on and then it just kept on trying to pick up the camera information and never was able to bind the camera. Waited for it to, but not going to happen!

"Got all the way to number 39!"
"Then the camera would not bind."
There are a lot of steps between Step 39, where you are just starting to bind the drone, Step 72, where you select the camera prior starting the camera bind, Step 80 where you start to bind the selected camera, and Step 99, where video should appear on screen.
Again, at what exact step did the process not match the expected result, and what did you see at that step.

"The model # showed under “Model”.
I think you are reporting success for Step 48. That is related to the drone bind. That is good, but it is not related to the camera bind. In fact, it is well before you have even started the camera bind sequence. Again, I may be confused. Without the step number, I have to guess at what step you are talking about.

"The GPS blue light is now on.."
I'm pretty sure you are just updating the status of the check at Step 5. And that is good to know. But since it was mentioned in the same sentence as waiting for the camera bind, I just want to be sure you are aware it is not related to camera bind.