Sorry, didn't realize I had tagged along in someone else’s thread. Chalk it up to me being a novice, and a newbie! 
You guys rock! We will talk again soon…hopefully.
You guys rock! We will talk again soon…hopefully.
Blade Chroma, need Manuals, Binding
- Thread starter tunneyinspectionservices
- Start date
"Got all the way to number 39!"Can I get a whoop whoop!
"Then the camera would not bind."
There are a lot of steps between Step 39, where you are just starting to bind the drone, Step 72, where you select the camera prior starting the camera bind, Step 80 where you start to bind the selected camera, and Step 99, where video should appear on screen.
Again, at what exact step did the process not match the expected result, and what did you see at that step.
"The model # showed under “Model”.
I think you are reporting success for Step 48. That is related to the drone bind. That is good, but it is not related to the camera bind. In fact, it is well before you have even started the camera bind sequence. Again, I may be confused. Without the step number, I have to guess at what step you are talking about.
"The GPS blue light is now on.."
I'm pretty sure you are just updating the status of the check at Step 5. And that is good to know. But since it was mentioned in the same sentence as waiting for the camera bind, I just want to be sure you are aware it is not related to camera bind.
One of the other members pointed out via PM that review of the standard binding process via a video might be appropriate. This is a good one. The only weakness I noticed was that there is no mention of ensuring the new model is actually "selected" after it is created (at about 1 minute into the video). If other models are present, just tap the new one to ensure the model is surrounded by a blue border/box.
This is a screenshot of the blue box at about 1 minute:
This is the actual video:
This is a screenshot of the blue box at about 1 minute:
This is the actual video:
