Broken toggle switch

[Ethan]

Sooo my st16 took a spill and I ended up with a broken off toggle switch for the obstacle avoidance. what can I do to replace it, any ideas of where to get a new one? has anyone done a repair yet?

 

[Steve Carr]

Dang. Sorry. It's unusual to hear the ST16 crashed rather the H.
You might try Carolina Dronz. Give 'em a call and see if they sell the switch or if they can replace it for you.

 

[Ethan]

Well my st 16 crashed as I was running to save my crashing TH.

 

[Tom C]

I don't think anyone can repair the toggle switch. But you can easily find the whole switch assembly on ebay or just by searching using google. try searching for gimbal stick switch on google then press images & you'll probably find one their & when you do you can open the image & right under it is a link to the site that has that switch (most of the time, rarely does it lead you to a site that just has the image of such a thing). Tom C

 

[BobW55]

See these threads:
EOI - Broken ST16 Toggle Switches.
http://yuneecpilots.com/posts/38169/
http://yuneecpilots.com/posts/18201/

 

[WesBur13]

I was able to replace the landing gear with a switch from a spektrum dx6i. They all are the same size


Sent from my Giant Robot Suit using Tapatalk Mech Edition

 

[PatR]

Since the Spektrum switch fits, you might be able to obtain one from Horizon Hobby and install it yourself. They are not difficult.


Sent from my iPhone using Tapatalk

 

[jpjr]

Vertigo drones fixed my landing gear switch this summer.


Sent from my iPhone using Tapatalk