Hello Fellow Yuneec Pilot!
Join our free Yuneec community and remove this annoying banner!
Sign up

CG03 Camera

Joined
Dec 13, 2024
Messages
3
Reaction score
5
Age
61
Hi All,
I have a Blade Chroma, and before John's passing, I sent him my camera for repair. When I got it back i could still not get it to work correctly. The screen on the remote flashes on and off with the picture the camera sees, but it will not work properly. I can control the movement of the camera with the remote, but the camera view rotates off and on. Any direction or help is appreciated. Thank you in advance. Ward
 
Hi All,
I have a Blade Chroma, and before John's passing, I sent him my camera for repair. When I got it back i could still not get it to work correctly. The screen on the remote flashes on and off with the picture the camera sees, but it will not work properly. I can control the movement of the camera with the remote, but the camera view rotates off and on. Any direction or help is appreciated. Thank you in advance. Ward
Is the controller an ST10 or an ST10+?

This type of problem can originate in either the camera or the controller. It would be good to first confirm which equipment has an issue. Do you have a second camera or controller you can try to compare results?

If you do not have a second controller you can try to view the CGo3 video using a PC and "VLC". (See attached instructions if needed.)
If the image is stable via VLC, it would suggest the issue is in the controller.
If the image continues to flash. disconnect or not show up on your home WiFi, it suggests the issue is in the camera.
 

Attachments

Hi, I have the ST10+ controller. Without the camera i can fly the drone with out any problems.
I'll review your instructions and see what I can figure out. I really appreciate this.

Best
Ward
 
Is the video on the SD card in the camera stable and without drop-outs?
I guess the camera is connected to the drone with the pigtail cable (the black cable between gimbal and drone). If so, check the contacts and wires if all are OK. Problems with WiFi and gimbal may have a source in power supply (step-down converter battery voltage to +5V for the camera).
 
  • Like
Reactions: WTFDproject

New Posts

Members online

No members online now.

Forum statistics

Threads
21,651
Messages
248,877
Members
28,917
Latest member
cpassenheim